Ipv6 Firewall - D-Link DIR-809 User Manual

Section 3 - Configuration
Click IPv6 Firewall on the navigation menu to configure the IPv6 Firewall Settings. When
you are satisfied with your configuration, click Save Settings.
Enable IPv6 Simple Enable or disable the IPv6 firewall.
Security:
20 -- IPV6 FIREWALL RULES
Configure IPv6 Select the function of the IPv6 Filter, the options are Turn IPv6
Filtering below: Filtering OFF, Turn IPv6 Filtering ON and ALLOW rules listed, Turn
IPv6 Filtering ON and DENY rules listed.
Enable: Check the box to enable this rule.
Name: Enter a name for the rule.
Schedule: Select the schedule from the drop-down menu. The default is Always.
Refer to Schedules on page 116 for more information on creating
new schedules.
Source Interface: Select the source interface, WAN or LAN, from the drop down menu.
Source IP Address / Enter the source IP address and specify the prefix length for the rule.
PrefixLength:
Select the protocol to apply the rule to, either ALL, TCP, UDP, or ICMP.
Protocol:
Select the destination interface, WAN or LAN, from the drop down
Destination
Interface: menu.
D-Link DIR-809 User Manual
IPV6 SIMPLE SECURITY

IPv6 Firewall

DIR-809
IPV6 FIREWALL IPV6 FIREWALL
IPV6 FIREWALL
The firewall settings section is an advance feature used to allow or deny traffic from passing through the device. It works in the same
way as IP Filters with additional settings. You can create more detailed rules for the device.
Save Settings Don't Save Settings
IPV6 SIMPLE SECURITY
Enable IPv6 Simple Security :
20 -- IPV6 FIREWALL RULES
Remaining number of rules that can be created: 24
Configure IPv6 Filtering below:
Turn IPv6 Filtering OFF ▼
Turn IPv6 Filtering ON and ALLOW rules listed
Turn IPv6 Filtering ON and DENY rules listed
Name Schedule
Always ▼
IP Address /PrefixLength
Interface
Source
LAN ▼
IP Address /PrefixLength
Interface
Dest
LAN ▼
Save Settings Don't Save Settings
ADVANCED
Protocol
ALL ▼
Port Range
~
105