D-Link DIR-809 User Manual page 33

Section 3 - Configuration
If you choose DHCP Connection (Dynamic IP Address) as your Internet Connection, enter your IP address, configure the following settings:
DHCP CONNECTION (DYNAMIC IP ADDRESS)
MAC Address: If your Internet connection is tied to a specific PC or hardware, enter
it manually or click Clone Your PC's MAC Address.
Host Name: Enter the host name of the router.
Primary DNS Enter the primary DNS server IP addresses.
Server:
Secondary DNS Enter the secondary DNS server IP addresses.
Server :
Click Next to continue.
Click Connect to finish the setup.
D-Link DIR-809 User Manual
Internet Connection Setup Wizard (continued)
DNS SETTINGS
SETUP COMPLETE!
DHCP
DHCP CONNECTION (DYNAMIC IP ADDRESS)
To set up this connection, please make sure that you are connected to the D-Link Router with the PC that was originally
connected to your broadband connection. If you are, then click the Clone MAC button to copy your computer's MAC
Address to the D-Link Router.
Note: You may also need to provide a Host Name.If you do not have or know this information, please contact your ISP.
DNS SETTINGS
SETUP COMPLETE!
The Internet Connection Setup Wizard has completed. Click the Connect button to save your settings.
MAC Address : (optional)
Clone Your PC's MAC Address
Host Name : dlinkrouter
Primary DNS Address :
Secondary DNS Address : (optional)
Prev Next Cancel Connect
Prev Next Cancel Connect
29