Qos Engine - D-Link DIR-809 User Manual

Section 3 - Configuration
Click QoS Engine on the navigation menu to configure Quality of Service (QoS). QoS allows
you to prioritize Internet traffic to ensure a better web browsing experience in situations
where bandwidth is limited or large numbers of devices are in use. QoS can improve your
online experience by ensuring that specific traffic is prioritized over other network traffic,
such as VoIP, FTP, or Web. When you are satisfied with your configuration, click Save Settings.
Enable QoS: Enable or disable QoS.
Uplink Speed: Enter your Internet connection's Uplink Speed in kbps or use the
Select Transmission Rate dropdown menu and the << button to
quickly select and populate a speed.
Downlink Speed:
Enter your Internet connection's Downlink Speed in kbps or use the
Select Transmission Rate dropdown menu and the << button to
quickly select and populate a speed.
Queue Type: Choose either Strict Priority Queue or Weighted Fair Queue. If you
select Weighted Fair Queue, you may adjust the percentage weights
for each queue.
Click the Save Settings button before proceeding to 32 -- ADD CLASSIFICATION RULE.
D-Link DIR-809 User Manual

QOS Engine

QOS SETUP
DIR-809
QOS ENGINE QOS SETTINGS
QOS SETTINGS
Use this section to configure D-Link's QoS Engine powered by QoS Engine Technology. This QoS Engine improves your online gaming
experience by ensuring that your game traffic is prioritized over other network traffic, such as FTP or Web.For best performance, use
the Automatic Classification option to automatically set the priority for your applications.
Save Settings Don't Save Settings
QOS SETUP
Enable Qos :
Uplink Speed :
0 kbps <<
Downlink Speed :
0 kbps <<
Queue Type : ž Strict Priority Queue š Weighted Fair Queue
Queue ID Queue Priority
1
2
3
4
32 -- ADD CLASSIFICATION RULE
Enable :
Name :
Queue ID : 1 - Highest
Protocol : ALL ▼
Classify : Upstream ▼
Local IP Range : Local IP Start
Application Port : Application Name
Remote IP Range : Remote IP Start
Add
CLASSIFICATION RULES
Enable Name Queue ID Protocol Classify
Save Settings Don't Save Settings
ADVANCED
Select Transmission Rate ▼
Select Transmission Rate ▼
Highest
Higher
Normal
Best Effort(default)
▼
Local IP End
to
▼ >> to
Remote IP End
to
Cancel
Application Remote Local IP
Port IP Range Range
89