D-Link DIR-809 User Manual page 73

Section 3 - Configuration
Select Autoconfiguration(SLAAC/DHCPv6) if your ISP assigns your
My IPv6
Connection is: IPv6 address when your router requests one from the ISP's server.
Some ISPs require you to adjust settings on your side before your
router can connect to the IPv6 Internet.
Select either Obtain DNS server address automatically or Use the following DNS address.
If you choose Use the following DNS address, please configure the following field:
Primary DNS Enter the primary DNS server address.
Address:
Secondary DNS Enter the secondary DNS server address.
Address:
LAN IPv6 Address Settings
Enable DHCP-PD:
Check this box to enable DHCP-PD.
LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router.
LAN IPv6 Link-
Displays the router's LAN link-local address.
Local Address:
D-Link DIR-809 User Manual
Autoconfiguration(SLAAC/DHCPv6)
IPV6 CONNECTION TYPE
IPV6 DNS SETTINGS
DIR-809
IPV6 IPV6
IPV6
Use this section to configure your IPv6 Connection Type.If you are unsure of your connection method, please contact your Internet
Service Provider.
Save Settings Don't Save Settings
IPV6 CONNECTION TYPE
Choose the mode to be used by the router to connect to the IPv6 Internet.
My IPv6 Connection is: Autoconfiguration(SLAAC/DHCPv6)
IPV6 DNS SETTINGS
Obtain DNS server address automatically or enter a specific DNS server address.
ž Obtain IPv6 DNS Servers automatically
š Use the following IPv6 DNS Servers
Primary DNS Address :
Secondary DNS Address :
LAN IPV6 ADDRESS SETTINGS
Use this section to configure the internal network settings of your router. If you change the LAN IPv6 Address here, you may need to
adjust your PC network settings to access the network again.
Enable DHCP-PD :
LAN IPv6 Address :
LAN IPv6 Link-Local Address : ffff::fff:ffff:ffff:1234 /64
ADDRESS AUTOCONFIGURATION SETTINGS
Use this section to setup IPv6 Autoconfiguration to assign IP addresses to the computers on your network. You can also enable DHCP-PD
to delegate prefixes for routers in your LAN.
Enable Automatic IPv6 address assignment :
Enable Automatic DHCP-PD in LAN :
Autoconfiguration Type : SLAAC+RDNSS
SLAAC+Stateless DHCP
Stateful DHCPv6
Router Advertisement Lifetime :
Save Settings Don't Save Settings
SETUP
▼
/64
▼
(minutes)
69