Technical Data; Technical Information - Main Eco Compact System 15 Installation And Service Manual

3.2

Technical data

Tab.5 General
Main Eco Compact System
Gas council numbers
Nominal heat input — central heating —
Maximum rate
Nominal heat input 80/60C° — Minimum rate
Nominal heat output 80/60°C — central heat­
ing — Maximum rate
Nominal heat output 80/60°C — central heat­
ing — Factory setting
Nominal heat output 80/60°C — Minimum
rate
Nominal heat output 50/30°C — central heat­
ing — Maximum rate
Nominal heat output 50/30°C — central heat­
ing — Minimum rate
Tab.6 Central heating circuit specifications
Main Eco Compact System
Maximum pressure
Minimum pressure
Central heating temperature adjustment (±5°C)
Expansion vessel water capacity
Expansion vessel pre charge pressure
Maximum capacity of central heating system
Primary water content of boiler (unpressurised)
Tab.4 In IE the following Code of Practice apply:
Standard Scope
IS 813 Domestic Gas Installations.
The following standards give valuable additional information:
BS 5546 Installation of hot water supplies for domestic purposes.
BS EN Heating systems in buildings.
12828
BS EN Heating systems in buildings — Calculation of load.
12831
BS EN Installation & commissioning of water based heating sys­
14336 tems.
BS 7074 Expansion vessels and ancillary equipment for sealed wa­
ter systems.
BS 7593 Treatment of water in domestic hot water central heating
systems.
3.2.1

Technical information

Important
All data in these sections are nominal and subject to normal
production tolerances.
Net (Qn Hi) kW
Gross (Qn Hs) kW
Net (Qn Hi) kW
Gross (Qn Hs) kW
Pn kW
Pn kW
Pn kW
Pnc kW
Pn kW
15
bar 3
bar 0.5
°C 25 / 80
litres 7.0
bar 1.0
litres 100
litres 2.5
15
41 467 30 41 467 31
15.5
17.2
4.64
5.15
15
15
4.5
16.2
4.9
18
3
0.5
25 / 80
7.0
1.0
100
2.5
3 Technical specifications
18
18.6
20.6
4.64
5.15
18
18
4.5
19.4
4.9
13