Intended Use; Unpacking Your Tool; Before Use; Setting Up The Battery Charger - Westfalia AMS 18 Instructions Manual

Intended Use

Versatile multi sander for working without access to the power grid.

Unpacking Your Tool

 Carefully unpack and inspect your sander. Familiarise yourself with
all its features and functions.
 Ensure that all parts of the tool are present and in good condition. If
any parts are missing or damaged, have such parts replaced before
attempting to use this tool.

Before Use

Please note that that battery and charger are not included with the
tool.
Removing the Battery
To remove the battery from the sander, press the battery release
button, then slide the battery off the battery slot (2).
WARNING: Do not try to remove the battery without pressing the
battery release button. The sander or battery could be damaged.
Fitting a battery
To fit a charged battery, slide it into the battery slot (8) of the sander
until it clicks and locks into position.
Note: Make sure the battery and sander are lined up correctly. If the
battery does not slide into the sander easily, don't force it. Instead, slide
the battery out of the sander again, check the top of battery and the
sander battery slot are clean and undamaged and that the contacts are
not bent.

Setting up the Battery Charger

(Battery and Charger not included)
1. If fitted, remove any battery from the battery charger.
2. Insert the battery charger mains plug into a suitable mains socket.
Note: One LED on the charger will indicate ready status. For further
information please refer to the included manual of the included charger.
Operation
15