Use Of The Working Programs - Nilfisk-Advance Advance SR 1100 P Manual For Use And Maintenance

USE OF THE WORKING PROGRAMS

After starting the "ECO" function it is possible to choose
one of the two working programs:
P1 is the "light cleaning program" (for internal
environment, i.e. smooth floor, moquette, small debris
etc.)
P2 is the "hard cleaning program" (for external
environment, i.e. asphalt, uneven floor, big debris etc.)
P1
After having pressed the preferred button the relevant light
indicator will turn on, together with the suction motor
indicator.
The temporary activation of the main brush and suction
electric motors will also occur; (the relevant light indicators
will flash).
Note: The working parameters of programs P1 and P2
are pre-set by the manufacturer of the machine: if
you want to change the pre-set values call the
customer service personnel of your supplier.
Lower the side brush/es by pressing the top of the relevant
lever and moving it forward.
Note: On the control panel the corresponding light
Indicators will turn on.
To lift the side brush/es press the top of the levers and
move them backwards.
Note: The side brush/es, the main brush and the suction
fan will start automatically when the accelerator
pedal will be pressed (AUTO POWER-ON).
146 1709 000(1)2004-03 GB
USE AND MAINTENANCE MANUAL
P2
GB
17