Weslo Fit N' Go WLIVEX85310.0 User Manual page 6

STEP 4
Attach the Pedal (7L/R) to the Crank (10L/R) of the Main
frame (1) use the Cross solid wrench.
Note: The left pedal (7L) should be tighten in the counter-
clockwise direction, the right pedal (7R) should be tighten in
the clockwise direction.
STEP 5
Insert the Saddle (28) into the Saddle horizontal post (29)
and then fix it using the Cross wrench.
Adjust the Saddle Horizontal post (29) to a suitable posi-
tion, and then fix it onto the Saddle post (16) with Knob nut
(34) and Flat washer (33).
Insert the Saddle post (16) into the post of Main frame (1),
and then fix with Pop-pin knob (11) .
Note: Before the campaign to ensure that the saddle 28
locking in the Saddle horizontal post(29).
STEP 6
Connect the Pulse sensor wire (19) and Sensor connect
wire (13) with the wires of Computer (27) respectively, and
then fasten the Computer (27) onto the computer bracket of
the Handle post (15) with Cross pan head screw (18) and
Flat washer (12) as shown.
5