Advertisement
Quick Links
ENG
GRAB-ON
FLUSH RAIL FEET
GOFR001
30 min
READ ME !
Thank you for purchasing Front Runner Grab-On Flush Rail Feet.
Before you start, take a moment to familiarize yourself with this Fitting Instruction and the components received.
Refer to Page 2 for a list of all the components, quantities and tools required.
IMPORTANT WARNING!
FRONT RUNNER CAN NOT RECOMMEND A MAXIMUM LOAD CARRYING CAPACITY. PLEASE REFER TO YOUR VEHICLE MANUFACTURER'S RECOMMENDATIONS. IT IS CRITICAL
THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD RESULT IN AN
AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT RUNNER PRODUCTS
TO YOUR VEHICLE. CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND DAMAGE. THEREFORE YOU
MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO INSTALLATION OR USE. IF YOU
DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY FAMILIAR WITH THE
INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
GOFR001_REV_A01
1
© COPYRIGHT 2017 FRONT RUNNER VEHICLE OUTFITTERS
Advertisement
Related Manuals for Front Runner GOFR001
Summary of Contents for Front Runner GOFR001
- Page 1 TO YOUR VEHICLE. CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND DAMAGE. THEREFORE YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
-
Page 2: Tools Needed
M8 Nyloc Nut 13MM M8 Nut Cap Cap Screw Washer M6 Spring Washer M6 x 60 Cap Screw Front Cover Plate M5 x 10 Button Head M6 x 50 Cap Screw FIGURE 1.1 GOFR001_REV_A01 © COPYRIGHT 2017 FRONT RUNNER VEHICLE OUTFITTERS... - Page 3 FIT AND SECURE Place your Front Runner Roof Rack onto your vehicles Flush Rails and find the best position. The Rack should sit level to the ground, not the vehicles roof line. Or slanting slightly down toward the front. Find the best position for the Feet, using the first or second Slat.
- Page 4 With a Measuring tape, center your Roof Rack. Fully Tighten all the M8 Nyloc Nuts (Item 4) and cover each of them with M8 Nut Caps (Item 5). L = R 13MM GOFR001_REV_A01 © COPYRIGHT 2017 FRONT RUNNER VEHICLE OUTFITTERS...
- Page 5 Congratulations. You did it. Take a step back and admire your work! Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions. Please call us if you have any questions about the installation of this product.