Download Print this page
Front Runner GWTL101-2 Manual

Front Runner GWTL101-2 Manual

Toyota land cruiser 70 gullwing window

Advertisement

Quick Links

front runner
Before you start, take a moment to familiarize yourself with the Fitting Instructions and the components received.
IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD
RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT
RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND
DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO
INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY
FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
GWTL101-2_REV_A01
TOYOTA LAND CRUISER 70
READ ME !
Thank you for purchasing a Front Runner Toyota Land Cruiser 70 Gullwing Window.
Refer to Page 2 for a list of all the components, quantities and tools required.
IMPORTANT WARNING!
Please call us if you have any questions about the installation of this product.
GULLWING WINDOW
1
GWTL101-2
© 2019 FRONT RUNNER VEHICLE OUTFITTERS
ENG

Advertisement

loading
Need help?

Need help?

Do you have a question about the GWTL101-2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Front Runner GWTL101-2

  • Page 1 FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL. NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
  • Page 2 10 X M6 Flat Washer M6 Nyloc Nut M6 Nut Cap Hinge Plate Gas Strut M6 x 20 Button Head Lock Mounting Bracket M6 Rivnut Lock M6 x 25 Button Head FIGURE 1.1 GWTL101-2_REV_A01 © 2019 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 3 (Item 2, 3, 4, 7 & 8). GWTL101- 10mm Pull back the Trim / Pinch W down the side of the rear pa opening as shown and caref GWTL101-2_REV_A01 © 2019 FRONT RUNNER VEHICLE OUTFITTERS interior body panel from the...
  • Page 4 Using a 10 mm Tube Socket and Wrench, loosen and remove the four nuts securing the hinges to the vehicle as indicated by Mark the position o GWTL101-2_REV _ A01 © 2019 FRONT RUNNER VEHICLE OUTFITTERS indicated, in the Gu the arrows. vehicle's body.
  • Page 5 Refi Refit the interior panel and seat belt removed in Steps .2A and 2B. LWING USED FOR TION PURPOSES unting points GWTL101-2_REV _ A01 © 2019 FRONT RUNNER VEHICLE OUTFITTERS Congratulations, you have completed your installa me onto the Cong...
  • Page 6 Refit the interior panel and seat belt removed in 3.1 and 3.2. hten Fully. eat belt GWTL101-2_REV _ A01 © 2019 FRONT RUNNER VEHICLE OUTFITTERS step back and admire your work. Good Job! ompleted your installation. Take a step back and admire your work. Good Job!
  • Page 7 Congratulations! You did it. Take a step back and admire your work! INSTALL OTHER VEHICLE AND RACK ACCESSORIES Now's the time to visit your favorite Front Runner Dealer in person or online. Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam Share your adventures on: ©...