Advertisement
2
FIT AND SECURE
2.1
2.4
2.4
8
11
2.5
2.2
Flush Rail
2.6
2.3
GOFR001_REV_A01
6
7
GOFR (GRIPS)
4
L = R
Depending on the width of the Flush Rail,
Use an M6 x 60 or M6 x 50 Allen Cap Screw
(Item 8 or 11), M6 Spring Washers and Cap
Screw Washer (Items 7 & 6) and loosely fit
the Flush Rail Grips (GOFR Grips)
to the Grab-On Flush Rail Foot (Item 2).
5MM
Repeat this step on the other Grab-On Flush
Rail Feet.
Place your Rack back onto the vehicle.
Position all the feet so that they rest on top
of the Flush Rails as shown.
With a Measuring tape, center your
Roof Rack.
Fully Tighten all the M8 Nyloc Nuts (Item 4)
and cover each of them with M8 Nut Caps
(Item 5).
13MM
4
© COPYRIGHT 2017 FRONT RUNNER VEHICLE OUTFITTERS
Advertisement
