Troubleshooting
13.3
NDI ToolBox Error Messages
The NDI ToolBox application software displays a box around the appropriate icon and an associated
error message in the status message area for a number of possible system fault conditions. The
72
Host USB Converter
Error LED is lit
Turn system mains power
off for 10 seconds, then
turn back on
Does
Yes
Error
LED go
off?
No
Disconnect Position
Sensor
Does
Yes
Error
LED go
off?
No
Check/Replace:
1. Power Adapter
2. Host USB Converter
Figure 13-1 Host USB Converter - Error LED Fault Chart
Fault Cleared
Replace Position
Sensor
Polaris Vicra User Guide - Revision 2