Polaris Vicra System Software; Component Parts List; Table 1-1 Component Parts List - Northern Digital Polaris Vicra User Manual

Polaris Vicra System Overview
The Position Sensor codes ("chirps") the IR pulses emitted from its illuminators. These coded IR
pulses are received by the IR receiver on the tool which then activates the IREDs. The Position
Sensor receives the IR emitted by the IREDs and processes it in the same manner as passive tool
reflections.
For more information on IRED markers, see
1.7

Polaris Vicra System Software

The following software is included on the Polaris Vicra CD. You can also download the software
from the NDI Support Site at: http://support.ndigital.com.
NDI CAPI Sample A sample program written for Windows, and the source code for the program.
This program provides an example of how to write programs to operate the Polaris Vicra System.
NDI ToolBox Use this program to configure, upgrade, troubleshoot, and test the Polaris Vicra
System. For more information, see the NDI ToolBox online help.
Note
NDI 6D Architect application software is located on the CD that accompanies the developer kit.
1.8

Component Parts List

The following is a list of components that are available with the Polaris Vicra System:.
Item
Polaris Vicra Position Sensor
Polaris Host USB Converter
(incorporating 4.5 m communications
cable)
Polaris Host USB Converter
(incorporating 8 m communications
cable)
Polaris Vicra Power Adapter
Power Cord
Universal Serial Bus (USB) A-B cable
2 m
Polaris Vicra CD
Polaris Vicra User Guide
Note
Additional components are available to support the Polaris Vicra System. Contact NDI for further details, or visit
the Support site at
14

Table 1-1 Component Parts List

http://support.ndigital.com
"Active Markers" on page
Part Number
8800788.xxx.yyy
8800810.001
8800810.002
4100139
7500010 (North America)
or
7500012 (France/Belgium/Germany)
2600596
1800042
IL-1070100
.
39.
Polaris Vicra User Guide - Revision 2