Information And Error Flags; Figure 4-1 Tool Tracking Window - Northern Digital Polaris Vicra User Manual

Using the Polaris Vicra System
As you move the tool, the symbol representing the tool in the graphical representation will move
to reflect the tool's position.
4.2

Information and Error Flags

This section describes how to trigger some of the most common flags. Tracking errors, warnings,
and marker information for each tool are displayed in the bottom right section of the tool tracking
utility.
To View Information and Error Flags
1. Set up the system to track tools, as described in
2. For each loaded tool definition file, there is a tab in the bottom right section of the tool tracking
utility. Select a tab to display tracking information for a particular tool.
"Partially Out of Volume" and "Out of Volume" flags:
Move the tool to the edge of the characterized measurement volume.
As you move the tool to the edge of the volume (some markers are in the volume and some out),
NDI ToolBox will display the message "Partially Out of Volume." Once the tool is completely
outside of the volume (all markers are outside the volume), NDI ToolBox will display the message
"Out of Volume."
42
"Getting Started: Tracking Tools" on page
Select a tab to display
tracking information for
a particular tool

Figure 4-1 Tool Tracking Window

Polaris Vicra User Guide - Revision 2
41.