Operating Environment; Temperature And Humidity; Subsoil Conditions; Environmental Conditions - Trotec SP2000 Pre-Installation Manual

SP2000
Side preparation
3.4

Operating environment

3.4.1

Temperature and humidity

Operating temperature:
Air humidity:
3.4.2

Subsoil conditions

Conditions:
- Planarity ±5 mm (±0.1969 inches)
- Solid, firm and vibration-free soil
- Easy-care and clean floor
Bearing capacity of the subsoil ≥1000 kg/m
-
- Machine point load 500kg/m² / 5 kN/m
- Monolithic subsoil conditions underneath the laser machine
- No special substrate preparation required
3.4.3

Environmental conditions

Conditions:
- Provide sufficient illumination at the workplace
- Ensure a dust-free environment (II° according to IEC60947-1)
- Shielding from EMC
- Freedom of interfering electrical installations, hoses and pipe lines
- Power supply free of fluctuations
14 / 30
15 °C to 25 °C (59 °F to 77 °F)
40% – 70% (non-condensing)
2 2
/ 10 kN/m (208.85 psf)
2
(102.4 psf)
www.troteclaser.com
IV 8034_2.0_EN (01/2017)