Auto Run Mode; Dmx Mode - involight SBL1008 User Manual

After power on, Press "MODE"button to activate the main menu: Built-in programs mode, Auto running
mode, DMX mode, Slave mode, sound-activited mode.
"SETUP" is to set the relative specification for current mode.
"UP" is to add the value of current specification.
"DOWN" is to decrease the value of current specification.
Built-in programs-- running one of 17 built-in programs
Auto run—running built-in programs one after another in continuous loop.
DMX mode--controlled by DMX controller
Slave mode—the projectors in this mode will be synchronously run with the projectors in master mode
Sound active mode-- running by sound - activated
four-pedal foot switch: auto run, sound active, freeze, blackout
1. built-in programs mode
Press mode until it shows Prxx, you can select 17 different built-in Programs. press"SETUP"and "UP"
"DOWN" buttons to select the programs (from Pr01 to Pr17) and select the desired program values. When it
shows Pr01, press "SETUP" to choose the seven static color.
When it is Pr02 to Pr17, press "SETUP" and "UP" "DOWN" buttons, you can set the values for
flash(FS00-FS99), fading time(Fd00-Fd99), running speed(SP00-SP99).
When it is Pr16 and Pr17, you can set the background color and running color for this effect, switch it from 1-
-r (background color)to 2- -r(running color) by "SETUP", adjust different colors by "UP" "DOWN".

2. Auto run mode

You can press "MODE"button to select auto run mode, it shows
programs automatically.
Press "SETUP", it shows n. 001, then you can adjust the running loops number by "UP" "DOWN"
3.

DMX mode

You can control the devices individually via your DMX-controller. Press "MODE"button until it shows
, this means DMX address is 001, you can set the DMX address by "UP" and "DOWN" buttons.
If press "SETUP" button, it will show d-p1 , it means the device is in which DMX mode 1. You can switch
these DMX modes by "UP"and"DOWN" buttons. There are 6 DMX modes.
DMX value as follows:
DMX mode1：d-P1
CH1
R
0—255 Light
(0 = OFF)
DMX mode2：d-P2
CH2
G
0—255 Light
(0 = OFF)
, then it will run the built-in
CH3
B
0—255 Light
(0 = OFF)