Advertisement
Item Description
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Phillips Screw driver
Mechanical Pliers
Knife or
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Caution: Avoid wearing jewelry during disassembly that can be exposed for electrical shock.
2. Remove the front panel manually (No tools required).
3. Remove screws from rear panel, cover and disassemble.
4. Cut power cord with a cutting tool.
5. Disassemble batteries (Disable the potential charge from the battery connectors and Disconnect battery terminals.)
6. Disassemble battery unit by removing rear panel and bars on top.
7. Remove bracket on back side of unit
8. Disassemble batteries.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
MF877-00
Template Revision A
Notes
HPE instructions for this template are available at
Tool Size (if
applicable)
#2
MF877-01
Quantity
of items
included
in product
0
Page 2
Advertisement
