Elation FUZE WASH 575 User Manual page 16

w w w . e l a t i o n l i g h t i n g . c o m
w w w . e l a t i o n l i g h t i n g . c o m
MAIN MENU SUB MENU
Reset. M
Test. Chan
Test
Panel. Ctrl
Calibrate
Select. Pro
Edit. Pro
Program
Edit. Sce
Sce. Input
Function - Status - Remote Add
When ON, define the desired DMX address of fixture via an external controller.
1. Connect the fixture to the external controller and power ON.
2. Set the DMX value of Channel 1 on the controller to (7).
3. Set the DMX value of Channel 2 on the controller to (7) or (8).
When set to (7), the DMX address can be set between (1) and (255).
When set to (8), the DMX address can be set between (256) and (511).
4. Using Channel 3 on the controller set the desired DMX address of the fixture.
Example 1:
If the desired DMX address is 57, set Channel 1 to a value of (7), set Channel 2 to
a value of (7), and then set Channel 3 to a value of (57).
Example 2:
If the desired DMX address is 420, set Channel 1 to a value of (7), set Channel 2 to
a value of (8), and then set Channel 3 to a value of (164). (256+164=420)
5. After setting Channel 3 to the desired DMX address value, wait for approximately
20 seconds for the fixture to complete the address reset function.
FUZE WASH 575™ User Manual
ELATION© FUZE WASH 575™
S Y S T E M M E N U
Features are subject to change without any prior written notice.
OPTIONS / VALUES
(Default Settings in BOLD)
Pan&Tilt
Password
Auto Pro Part1 = Program 1~9 (Program 1)
Auto Pro Part2 = Program 1~9 (Program 2)
Auto Pro Part3 = Program 1~9 (Program 3)
Program 1
:
Program 9
Scene 001
~
Scene 250
XX~XX
Password= 050
Program Test
Step 01=SCxxx
Step 64=SCxxx
Pan,Tilt,......
--Fade Time--
--Scene Time--
Input By Outside
16
DESCRIPTION
Reset of Pan/Tilt Motors
Test Functions
Fine Adjustments
Calibration of Motors and LEDs
Select Programs To Be Run
Testing Program
Program In Loop
Save and Exit
Save and Automatically Return
Manual Scenes Edit
Stores Scenes via Ext DMX Console
Automatic Scenes Recorder