Elation FUZE WASH 575 User Manual page 11

w w w . e l a t i o n l i g h t i n g . c o m
CLAMP INSTALLATION
The fixture provides a unique mounting assembly (Omega Bracket) that attaches to
the bottom of the base. (See the illustration below). When mounting this fixture to
truss be sure to secure an appropriately rated clamp to the included Omega
Bracket using a M10 screw fitted through the center hole of the Omega Bracket. Be
sure to attach an appropriate Safety Cable (not included) to the fixture using the
safety cable rigging point integrated in the base assembly.
OMEGA BRACKET INSTALLATION
Insert the Omega Bracket into the matching holes on the bottom of the fixture.
Secure the Omega Bracket to the fixture by turning each quick-lock fastener ¼ turn
clockwise; making sure the fastener is completely locked.
SAFETY CABLE RIGGING POINT
S A F E T Y C A B L E
ALWAYS ATTACH A SAFETY CABLE TO
THE FIXTURE WHENEVER INSTALLING
IN A SUSPENDED ENVIRONMENT TO
ENSURE THE FIXTURE WILL NOT DROP
IF CLAMP FAILS.
11 FUZE WASH 575™ User Manual