Category
Hardware and peripherals
Tools
Setting up the NAS
Important
Read all safety requirements and information in
up the NAS or installing NAS components.
1. Place your NAS device in an environment that meets the requirements.
For details, see
Installation
2. Install the drives.
For details, see the following topics:
•
Installing 3.5-inch Hard Drives on 3.5-inch Trays
•
Installing 2.5-inch Hard Drives or Solid State Drives on 3.5-inch Trays
3. Connect the power cord and all applicable cables.
4. Power on the NAS.
5. Install QTS.
For details, see
QTS
6. Log on to QTS.
• Storage drives
For details on compatible drives, go to
compatibility/.
• Network cable
• Phillips #1 or #2 screwdriver
• Anti-static wrist strap
Requirements.
Installation.
Item
https://www.qnap.com/
Safety Information
carefully before setting
TS-x83XU User Guide
Product Overview
13