UTC Taylor Crown Series Operator Training page 85

Overview Release Sheets
Troubleshooting
The display reads "HOME SWITCH
STUCK ON. CLAM ITEMS BLOCKED.
CALL FOR SERVICE."
Cause: Two sided cooking options are blocked.
Remedy: Turn the control off and then back on
the clear the fault.
Cause: Defective stepper motor.
Remedy: Call an authorized service technician.
Cause: Defective stepper motor wire harness.
Remedy: Call an authorized service technician.
Grill Cleaning Startup & Cooking
Cause: Defective home switch.
Remedy: Call an authorized service technician.
Cause: Defective motor control.
Remedy: Call an authorized service technician.
The display reads "PROBE OPEN"
and displays the specific zone.
Cause: The thermocouple or the thermocouple
interface board is faulty.
Remedy: Call an authorized service technician.
Taylor Company is part of UTC Climate, Controls & Security, a unit of United Technologies Corp.
© Taylor Company, a division of Carrier Commercial Refrigeration, Inc. 2017.
Troubleshooting Troubleshooting Quiz