Electrolux EOC700 User Manual page 29

• To clean metal surfaces, use a
dedicated cleaning agent.
• Clean the appliance interior after each
use. Fat accumulation or other food
remains may result in a fire. The risk
is higher for the grill pan.
• Clean stubborn dirt with a special
oven cleaner.
• Clean all accessories after each use
and let them dry. Use a soft cloth with
warm water and a cleaning agent.
• If you have nonstick accessories, do
not clean them using aggressive
agents, sharp-edged objects or a
dishwasher. It can cause damage to
the nonstick coating.
10.2 Removing the shelf
supports
To clean the oven, remove the shelf
supports.
1. Pull the front of the shelf support
away from the side wall.
2. Pull the rear end of the shelf support
away from the side wall and remove
it.
1
Install the shelf supports in the opposite
sequence.
2
10.3 Catalysis
CAUTION!
Do not clean the catalytic
surface with oven sprays,
abrasive cleaning agents,
soap or other cleaning
agents. This will damage the
catalytic surface.
Clean the inner glass of the oven door
with warm water and a soft cloth.
Remove all accessories.
The walls and the top of the cavity are
coated with catalytic enamel. It gathers
fat and dirt which burns off at high
temperatures without leaving a smell.
To support this self-cleaning process
heat the empty appliance regularly.
Spots or discolouration of
the catalytic surface have no
effect on its catalytic
properties.
1. Set the Catalysis function. Refer to
"Oven functions".
The display shows CATA and the
duration of the cleaning procedure (1
hour). You cannot change the duration,
but you can use the End function to
delay the start of the cleaning procedure.
An acoustic signal sounds after the time
ends. The appliance deactivates.
2. Push a button to stop the acoustic
signal.
3. Clean the bottom of the appliance
with a damp soft sponge.
To stop Catalysis before it finishes, turn
the knob for the oven functions to the off
position.
10.4 Cleaning reminder
As a reminder that catalytic cleaning is
necessary, CATA flashes in the display
for 10 seconds after each activation and
deactivation of the appliance.
ENGLISH 29