Cubiclebus² Terminating Resistor; Description; Technical Specifications; Article Number - Siemens SENTRON 3WA1 Manual

4.15.4 CubicleBUS² terminating resistor
4.15.4.1

Description

The CubicleBUS
resistor.
The required terminating resistor forms part of the scope of supply of every CubicleBUS
module and circuit breaker.
The terminating resistor can be reordered as an accessory should it get lost.
The terminating resistor for connection to the circuit breaker is of a different length.
Version L (long version) is intended for connection to the secondary disconnect terminal
of the circuit breaker and version S (short version) for connection to a CubicleBUS
module.
Both versions are supplied in the event of a reorder.
You will find more information in the operating instructions available on the internet
(https://support.industry.siemens.com/cs/ww/en/view/109792563).
4.15.4.2

Technical specifications

Resistance
Power rating
4.15.4.3

Article number

CubicleBUS² terminating resistor
You can purchase the accessories in the Siemens Industry Mall
(http://www.siemens.com/product?3WA9111-0EC50).
3WA1 air circuit breaker
Equipment Manual, 02/2023, 92310000002-06
must be terminated at the final module with a 120 Ω terminating
2
4.15 Communication interface
120 Ω
0.25 W
Accessories
2
2
Article number
3WA9111-0EC50
383