Dsp800 Display - Siemens SENTRON 3WA1 Manual

Applications

3.5 DSP800 display

3.5 DSP800 display
The DSP800 display is used for the visualization of device information and measured
data directly at the cubicle door. It can be connected to the Ethernet interface (Modbus
TCP protocol) of the COM190 communications module. The DSP800 display is deployed
for any application which requires visual indication (i.e. directly at the power distribution
equipment) without additional software support. This makes it possible to visualize
device information and measured data without operating the ETU of the circuit breaker.
The start page of the DSP800 displays the status and maximum current of all devices. All
the detailed information about individual devices can be selected via the efficiently
structured menu.
The detailed information includes:
• Metering values, such as current, voltage and energy values
• ETU setting parameters
• Status of the circuit breaker
• Diagnostics / maintenance information
Information is visualized using ready-made menus and does not require software
development. Templates for 1, 2, 4 and 8 devices are available on the start screen. These
can either be selected and arranged automatically or they can be manually assigned. In
addition, the metering values to be displayed can be selected in the overview.
216
3WA1 air circuit breaker
Equipment Manual, 02/2023, 92310000002-06