Table of Contents
Advertisement
Select the "Parental Control" menu using the menu button
and
. You are now prompted to enter the PIN code (factory default setting: 0000). After entering the
PIN using the number pad you are
shown the following on-screen display:
Also note the bars at the bottom
of
the
on-screen
These provide information on
what to do next.
Select the parameters to be changed using the
LOCK MAINMENU
Use the
buttons (On/Off) to select whether the main menu should be locked. If the menu is
locked, changes can be made only by entering the four-digit PIN code.
LOCK SET-TOP-BOX
Use the
buttons (On/Off) to select whether the receiver should be locked. If the receiver
is locked, it can be operated only by entering the four-digit PIN code after it has been switched on
(factory setting: 0000).
Press the
button to exit the menu again.
58
PARENTAL CONTROL
display!
, the
buttons.
buttons on the main menu
Advertisement
Table of Contents
