Parental Control; Blocking The Main Menu; Blocking The Receiver; Setting A New Code (Pin) - Kathrein UFS 740sw Operating Manual

Select the "Parental Control" menu using the menu button
and . You are now prompted to enter the PIN code (factory default setting: 0000). After entering the
PIN using the keypad you are shown the following display:
Also pay attention to the bars
at the bottom of the on-screen
display! This provides hints on
what to do next.
Select the parameters to be changed using the

BLOCKING THE MAIN MENU

Use the buttons (On/Off) to select whether the main menu should be blocked. If the menu is
blocked, changes can be made only by entering the four-digit PIN code.

BLOCKING THE RECEIVER

Use the buttons (On/Off) to select whether the receiver should be blocked. If the receiver is blocked,
it can be operated only by entering the four-digit PIN code after it is switched on (factory setting: 0000).
Press the button to exit the menu again.

SETTING A NEW CODE (PIN)

Press to replace the old PIN with a new one. Enter the new (four-digit) PIN. For security you must repeat
the new PIN code once again. Confi rm the change of PIN code by pressing the
Keep your password in a safe place, so that you always have access to your channels
even if you might have forgotten it.
If you have forgotten your password, you must contact your dealer, who will be able
to unlock your receiver for you.

PARENTAL CONTROL

buttons.
, the buttons on the main menu
button.
65