Connecting To Video/Dvr; Recording; Playback - Kathrein UFS 641si Operating Manual

CONNECTING TO VIDEO/DVR

For details of how to connect your external recorder to the receiver refer to the connection diagram
provided at the end of this manual and the instructions for the external recorder.

RECORDING

In order to make a VCR recording (Record), the satellite receiver must be switched on or the timers
must be pre-programmed (see "EPG" "Recording (timer)" section).

PLAYBACK

For VCR/DVR playback you must have previously set the UFS 641 Scart socket to "Scart>VCR

(VCR mode)" (Scart switching), using the button, so that the signal path is set up from the VCR or
DVR/AUX Scart socket to the TV Scart socket.
In this setting, the picture from the external recorder is switched through to the TV set during

playback. Pressing the button again restores priority to the signal from the UFS 641 "Scart>Sat".
The settings "Scart>VCR" and "Scart>Sat" are shown in the display of the receiver.
68