Recording (Timer) - Kathrein UFS 641si Operating Manual

EPG - ELECTRONIC PROGRAMME GUIDE

RECORDING (TIMER)


The (red dot) button allows you to set up a programme at any time for recording on an external
recorder. The programme to be recorded can be selected in any of the EPG views, provided the

(red dot) button appears at the bottom of the on-screen display.
Programme in the EPG:
Select the desired programme and press the
appears (see example picture below):
If the programme does not appear on the EPG:
Select any programme on the channel on which the desired programme is to be transmitted at
a later time and press the
recording date must be entered manually). The following on-screen display appears (example):
Remember
programme
external
in accordance with
the recording
programmed in the
receiver.

Use the buttons to select the desired recording mode. The following recording mode options
are available:
- once: The recording will be performed once
- daily: The recording will be performed daily at a time specifi ed by you
- weekly: The recording will be performed once a week on the same day and at the same time
Use the cursor buttons (
settings. When all settings have been made, press the
You can view the scheduled recordings in the timer list view of the EPG (see "Timer list" section).

(red dot) button (starting and fi nishing times together with the
to
your
recorder
list

) to select the further items and use the number pad to complete the

(red dot) button. The following on-screen display

button to save the recording settings.
41