Programmes; Settings - Electrolux ESF5206LOW User Manual

48 www.electrolux.com

5. PROGRAMMES

Programme
2)
3)
4)
1) The pressure and the temperature of the water, the variations of the mains supply, the
options and the quantity of dishes can change the values.
2) With this programme you have the most efficient use of water and energy consumption
for crockery and cutlery with normal soil. (This is the standard programme for test institutes).
3) With this programme you can wash a load with fresh soil. It gives good washing results in
a short time.
4) Use this programme to quickly rinse the dishes. this prevents the remaining food to bond
on the dishes and bad odours to come out from the appliance. Do not use detergent with
this programme.
5.1 Information for test
institutes
For all the necessary information for test
performance, send an email to:

6. SETTINGS

6.1 Programme selection mode
and user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
Settings available in the user mode:
Degree of soil Programme
Type of load phases
Normal soil • Prewash
Crockery and • Wash 50 °C
cutlery • Rinses
• Dry
Heavy soil • Prewash
Crockery, cut‐ • Wash 70 °C
lery, pots and • Rinses
pans • Dry
Normal soil • Prewash
Crockery and • Wash 65 °C
cutlery • Rinses
• Dry
Fresh soil • Wash 60 °C
Crockery and
cutlery • Rinses
All • Prewash
Consumption values
1)
Duration
(min)
222
155 - 170 1.5 - 1.7
130 - 140 1.4 - 1.6
30
or 65 °C
14
info.test@dishwasher-production.com
Write down the product number (PNC)
that is on the rating plate.
• The level of the water softener
according to the water hardness.
• The activation or the deactivation of
AirDry
As the appliance stores the saved
settings, there is no need to configure
it before every cycle.
Energy Water
(kWh) (l)
1.039 11
14-15
15-17
0.8 10
0.1 5