12. TECHNICAL INFORMATION................. 19 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
Page 3
ENGLISH responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...
Do not leave the appliance with the open door • unattended to avoid stepping accidentally onto it. Before any maintenance operation, deactivate the • appliance and disconnect the mains plug from the socket. Do not use high pressure water sprays and/or steam •...
ENGLISH 2.4 Use • Do not put flammable products or items that are wet with flammable • Do not sit or stand on the open door. products in, near or on the appliance. • Dishwasher detergents are dangerous. Obey the safety 2.5 Disposal instructions on the detergent packaging.
4. CONTROL PANEL On/off indicator Start button Programme marker Programme knob Indicators Delay button 4.1 Indicators Indicator Description Washing phase. It comes on when the washing phase operates. Drying phase. It comes on when the drying phase operates. End indicator.
ENGLISH 5. PROGRAMMES Programme Degree of soil Programme Consumption values Type of load phases Duration Energy Water (min) (kWh) Normal soil • Prewash 1.039 Crockery and • Wash 50 °C cutlery • Rinses • Dry Heavy soil • Prewash 155 - 170 1.5 - 1.7 14-15 Crockery, cut‐...
Page 8
How to set the programme results and on the appliance. selection mode The higher the content of these minerals, the harder your water is. Water hardness The appliance is in programme selection is measured in equivalent scales.
ENGLISH 2. To enter the user mode, press and AirDry is automatically activated with all hold Delay. At the same time turn the programmes excluding knob counterclockwise until the (if applicable). programme marker indicates the first programme. Release the Delay when CAUTION! the indicators Start and on/off start If children have access to...
Page 10
If not, adjust the level of the water softener. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open the water tap. 5. Start a programme to remove any processing residuals that can still be inside the appliance.
ENGLISH 1. Press the release button (D) to open 4. Close the lid. Make sure that the the lid (C). release button locks into position. 2. Pour the rinse aid in the dispenser You can turn the selector of (A) until the liquid reaches the fill the released quantity (B) level 'max'.
2. Press Delay to delay the start of the Cancelling the delay start while programme of 3 hours. the countdown operates The delay indicator comes on. 3. Press Start. 1. Press and hold Start and Delay until Start indicator comes on.
Page 13
ENGLISH 9.2 Using salt, rinse aid and • Do not put in the appliance items that can absorb water (sponges, detergent household cloths). • Remove larger residues of food from • Only use salt, rinse aid and detergent the dishes into the waste bin. for dishwasher.
10. CARE AND CLEANING 3. Remove the flat filter (A). WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the main socket. Dirty filters and clogged spray arms decrease the washing results. Make a check regularly and, if 4.
ENGLISH 10.3 External cleaning • Clean the appliance with a moist soft cloth. • Only use neutral detergents. • Do not use abrasive products, abrasive cleaning pads or solvents. 10.4 Internal cleaning • Carefully clean the appliance, including the rubber gasket of the door, with a soft damp cloth.
Page 16
Problem and alarm code Possible cause and solution The programme does not start. • Make sure that the appliance door is closed. • Press Start. • If the delay start is set, cancel the setting or wait for the end of the countdown.
Page 17
ENGLISH Problem and alarm code Possible cause and solution The appliance trips the circuit-beak‐ • The amperage is insufficient to supply si‐ multaneously all the appliances in use. Check the socket amperage and the capaci‐ ty of the meter or turn off one of the applian‐ ces in use.
Page 18
Problem Possible cause and solution The dishes are wet. • For the best drying performance activate AirDry. • The programme does not have a drying phase or has a drying phase with low temperature. • The rinse aid dispenser is empty.
ENGLISH Refer to "Before first use", "Daily use" or "Hints and tips" for other possible causes. 12. TECHNICAL INFORMATION Dimensions Width / height / depth 600 / 850 / 625 (mm) Voltage (V) 220 - 240 Electrical connection Frequency (Hz) Water supply pressure Min.