Washing Programmes - Electrolux GA60GLV401 User Manual

14 electrolux
Fill the detergent dispenser with detergent
before you set a new washing programme.
Setting and starting a washing
programme with delay start
1. Press the on/off button.
2. Set a washing programme.
3. Press the delay start button until the dig-
ital display shows the necessary delay
start of the washing programme.
4. Close the door.
– The countdown of the delay start
starts.
– When the countdown is completed,
the washing programme starts auto-
matically.
Do not open the door during the count-
down to prevent interruption of the
countdown. When you close the door
again, the countdown continues from
the point of interruption.
Cancelling a delay start
1. Press and hold the cancel button until the
digital display shows two horizontal bars.
– When you cancel a delay start, you also
cancel the washing programme.
2. Set a new washing programme.
End of the washing programme
• The appliance stops automatically.
• The audible signal for the end of the pro-
gramme operates.
1. Open the door.
– The digital display shows 0.

Washing programmes

Washing programmes
Programme
1
Automatic
2)
45°-70°C
2
Intensive 70°C
Degree of Type of load
soil
Any Crockery, cut-
lery, pots and
pans
Heavy soil Crockery, cut-
lery, pots and
pans
– The end-of-programme indicator light
comes on.
2. Press the on/off button.
3. For better drying results, keep the door
ajar for some minutes before you remove
the dishes.
Let the dishes cool down before you remove
them from the appliance. Hot dishes are
easily damaged.
If the save energy function is set, dishes
can be wet once the programme finish-
ed. We recommend to leave the appli-
ance door ajar so that dishes can dry
naturally.
Standby mode
If you do not switch off the appliance at the
end of the washing programme, the appli-
ance automatically goes into standby mode.
The standby mode decreases energy con-
sumption.
Three minutes after the end of the pro-
gramme, all indicator lights go off and the
digital display shows one horizontal bar. The
optical signal goes off.
Press one of the buttons (not the on/off but-
ton), to go back to end-of-programme mode.
Removing the load
• First remove items from the lower basket,
then from the upper basket.
• There can be water on the sides and door
of the appliance. Stainless steel becomes
cool more quickly than the dishes.
Programme descrip-
tion
Prewash
Main wash up to 45°C or
70°C
1 or 2 intermediate rinses
Final rinse
Drying
Prewash
Main wash up to 70°C
2 intermediate rinses
Final rinse
Drying
1)
Save energy
Selectable, im-
pact on washing
programme
Selectable, im-
pact on washing
programme