Washing Programmes - Electrolux ESL 47020 User Manual

14 electrolux
4. Press the delay button again and again
until the display shows the time of the
delay start.
• The time of the delay start flashes in
the display.
• The delay indicator is on.
5. Close the appliance door, the count-
down starts automatically.
When the countdown is completed, the
washing programme starts automatically.
The opening of the appliance door in-
terrupts the countdown. When you
close the door, the countdown contin-
ues from the point of interruption.
Interruption of a washing programme
• Open the appliance door.
– The washing programme stops.
• Close the appliance door.
– The washing programme continues
from the point of interruption.
How to cancel a washing programme
or a delay start
If a washing programme or a delay
start has not started, you can change
the selection.
When a washing programme or a delay
start are in progress, it is not possible
to change the selection. It is necessary
to cancel the washing programme or
the delay start to make a new selec-
tion.
When you cancel the delay start, this
automatically cancels the selected
washing programme. You have to se-
lect the washing programme again.

WASHING PROGRAMMES

Programme Type of
soil
1 All
1)
2 Heavy soil
Type of load Programme descrip-
Crockery, cut- Prewash
lery, pots and Wash 45 °C or 70 °C
pans Rinses
Dry
Crockery, cut- Prewash
lery, pots and Wash 70 °C
pans Rinses
Dry
1. Press and hold the cancel button until
the display shows two horizontal bars.
2. Make sure that there is detergent in the
detergent dispenser before you start a
new washing programme.
End of the washing programme
When the washing programme is comple-
ted, an intermittent acoustic signal sounds.
1. Open the appliance door.
• The end indicator is on
• The display shows a zero.
2. Deactivate the appliance.
3. For better drying results, keep the appli-
ance door ajar for some minutes.
• If you do not switch off the appli-
ance, after three minutes from the
end of the washing programme:
– all indicator lights go off,
– the display shows one horizontal
bar,
– the optical signal goes off.
This helps to decrease energy con-
sumption.
Press one of the buttons (not the on/off
button), the display and the indicator
lights come on again.
Remove the items from the baskets
• Let the dishes become cold before you
remove them from the appliance. Hot
dishes can be easily damaged.
• First remove the items from the lower
basket, then from the upper basket.
• There can be water on the sides and on
the door of the appliance. Stainless steel
becomes cool more quickly than the
dishes.
tion
Energy saver function
Yes, with effect
Yes, with effect