Certifications And Approvals - Siemens SIMATIC NET S7-300-PROFIBUS CP 342-5 Equipment Manual

Certifications and approvals

Approvals issued
Note
Issued approvals on the type plate of the device
The specified approvals apply only when the corresponding mark is printed on the product.
You can check which of the following approvals have been granted for your product by the
markings on the type plate.
Approvals for shipbuilding are not printed on the device type plate.
Documents on the Internet
You will find the declarations of conformity listed below and certificates of the product on the
Internet at the following address:
Link: (https://support.industry.siemens.com/cs/ww/en/ps/15674/cert)
You can see the current versions of the standards in the relevant certificate, which you will
find on the Internet at the address specified above.
Address for declarations of conformity
The EU and the UK declarations of conformity are available to all responsible authorities at:
Siemens Aktiengesellschaft
Digital Industries
P.O. Box 48 48
90026 Nuremberg
Germany
CP 342-5
Equipment Manual, 01/2023, C79000-G8976-C146-11
A
47