6-11. Power Source Selection Menu - Miller S-74 MPa Plus Control Box Cobot CE Owner's Manual

6-11. Power Source Selection Menu

1
Power Source* Left Display
Invision/XMT MPa
35X MPa
Invision/XMT MPa
450 MPa
Deltaweld 302 DELT
Deltaweld 452 DELT
Deltaweld 652 DELT
Dimension 302 DIM
Dimension NT DIM
450
Dimension 452 DIM
Dimension 652 DIM
XMT 304 XMT
XMT 350 XMT
XMT 456 XMT
Invision 456 INV
Invision 354 INV
Optima OPT
Custom CUST
*For any power sources not listed, pick a matching voltage range or see Section 6-6 to set
Vmin and Vmax.
OM-289404 Page 22
2
Right Display Voltage Range
35X Vmin=10
450 Vmin=10
302 Vmin=10
452 Vmin=10
652 Vmin=10
302 Vmin=10
450 Vmin=10
452 Vmin=10
652 Vmin=10
304 Vmin=10
350 Vmin=10
456 Vmin=10
456 Vmin=10
354 Vmin=10
IMA Vmin=10
PWR.S Vmin=10
1 Left Display
2 Right Display
�
When the feeder is turned on, the
Power Source Selection Menu allows
the operator to select a default power
source. Selecting a default power
source, automatically sets the correct
Vmin and Vmax settings for adjusting
the output voltage of the power source.
First Time Feeder Is Turned On
The feeder automatically goes into the
Power Source Selection Menu. The feeder
displays "MPA" on the Left Display and
"35X" on the Right Display, meaning that a
MPa 350 amp machine is the default power
source, and has a voltage range of 10V as
Vmin and 38V as Vmax.
At power up, the operator has three seconds
to select a default power source from the list
shown on the display. Operator may scroll
through the list of power sources by using
the Adjust control. After selecting a power
source the operator has three seconds to
change to a different power source or begin
welding. When turning off the feeder, the de-
Vmax=38
fault power source will be retained.
Vmax=38
Next Time Feeder Is Turned On
The feeder will display the last selected de-
Vmax=32
fault power source. The operator has three
Vmax=38 seconds to select another power source, or
press the Program Button to exit the Power
Vmax=44
Source Selection Menu.
Vmax=32
Vmax=38
Vmax=38
Vmax=65
Vmax=35
Vmax=38
Vmax=38
Vmax=38
Vmax=35
Vmax=38
Vmax=38
OM-273244 Page 21