Installation, Operation and Maintenance Manual
VCIOM-17127-EN Rev. 0
Figure 24
Figure 25
•
•
Installation
Place the OM1 card onto the spacers and tighten the 4 screws; assemble local
mechanical indicator as shown in Figure 26.
Connect the following connectors as shown in Figure 27:
—
the 8-pin connector to connector J3 on OM1
—
the 3-pin connector to connector J6 on OM1
—
the 2-pin connector to connector J7 on OM1
Section 2: Installation
September 2022
13