Download Print this page

HP Metal Jet S100 Product Documentation page 15

Powder removal station
Hide thumbs Also See for Metal Jet S100:

Advertisement

Warning labels
Label
12
Chapter 1 HP Metal Jet S100 Powder Removal Station Introductory Information
Explanation
Equipment serial label, includes the following information:
Manufacturer
Product No.
Serial No.
Regulatory Model No.
Regulatory markings
Electrical ratings
Country of origin
WARNING!
Equipment must be connected to earthed mains
outlet only.
Configure the building's electrical system used to power
the equipment to meet its electrical requirements and the
Electrical Code requirements of the local jurisdiction of the
country where the equipment is installed.
No operator serviceable parts inside. Refer servicing to
qualified servicing personnel only.
CAUTION:
Main power switch.
With emergency switch off function.
Disconnect before servicing.
Enable lockout/tagout before servicing.
WARNING!
Push-button energize hazardous subsystem.
Do not operate with guards removed or safety functions
bypassed.
CAUTION:
Main power switch
With emergency switch off function.
Enable lockout/tagout before servicing.
WARNING!
Emergency stop button.
In case of unexpected malfunction, anomaly, ESD
(ElectroStatic Discharges), or electromagnetic interference,
press the emergency stop button and disconnect the
equipment. If the problem persists, contact your support
representative.

Advertisement

loading

Subscribe to Our Youtube Channel