Advertisement
If moving the build unit between different rooms, bear in mind that it should be kept in constant
environmental conditions.
Portable tank transport
Special care must be taken to avoid personal injury when moving the portable tank.
●
Always wear personal protective equipment including boots and gloves.
●
Always transport the portable tank with the lid properly placed and the clamp closed to avoid
generating dust clouds.
●
Steer the portable tank only using the handle.
If moving the portable tank between different rooms, bear in mind that it should be kept in constant
environmental conditions.
Ergonomic risk
Operation and maintenance tasks require handling heavy loads. For instance, build unit and portable
tank transport, safety lid handling, opening the printer's top cover, consumables, and feedstock material,
among others.
CAUTION:
CAUTION:
To avoid muscle strain or back injury when moving equipment or handling items, follow proper
techniques or use of auxiliary lifting/carrying aids or using more than one person if required.
NOTICE:
The build unit, empty or full, is a heavy device. Take into consideration its maximum weight of
552 kg (1217 lb) during daily moving or transport tasks.
The portable tank, empty or full, is a heavy device. Take into consideration its maximum weight of 512 kg
(1129 lb) during daily moving or transport tasks.
During daily operations, the build unit and /or portable tank can be moved on a ramp with no more than
2° of inclination.
In case of equipment relocation, remove all material (powder) and consumables. The customer takes
full responsibility for moving equipment, the use of auxiliary lifting/carrying aids, and providing the
required personnel. Refer to the
Operation and maintenance tasks may require the use of a ladder or work platform to reach remote
parts. For instance, accessing the print-zone area, mixer, and input tank, among others.
The customer takes full responsibility for room layout, auxiliary equipment, personal protective
equipment (PPE), and working procedures, among other safety aspects, throughout the entire operation
of the equipment. Refer to
3D part unpacking
Refer to the safety data sheet and meet local regulations in order to use the appropriate personal
protective equipment needed, including heat and chemical resistant gloves when unpacking 3D printed
parts.
10
Chapter 1 HP Metal Jet S100 Powder Removal Station Introductory Information
Heavy loads.
Work platform recommended.
Site Preparation Guide , " moving equipment " section.
Site Preparation Guide for more information.
Advertisement
