Ego Power+ ZT5200E-L Operator's Manual page 48

LCD
Description
Display
PCBA controlled
middle blade
motor fails
Plug (Triple-
phase,
Middle
Power wire)
See blade
connecting the
"Fault motor
middle blade
Code"
fails in
motor with the
rotation
corresponding
PCBA is
loosened.
Middle blade
motor fails
Left steering
lever controlling
PCBA fails.
Left
See
steering
Plug connecting
"Fault
lever
the controlling
Code"
fails.
PCBA, located in
the steering bar,
is loosened.
Right steering
lever controlling
PCBA fails.
Right
See
steering
Plug connecting
"Fault
lever
the controlling
Code"
fails.
PCBA, located in
the steering bar,
is loosened.
Parking brake
Parking
PCBA, which
brake
is in the front
See fails,
frame assembly,
"Fault the tool
is broken.
Code" cannot
Parking brake
be
switch and/or
driven.
wire is broken.
OFF Charging Prot Fault
48
ZERO TURN RIDING MOWER — ZT5200E-L
Fault
Mower
Code
Status Beeper
on
Indicator
LCD
507/
n/a One beep
607
A09 n/a One beep
A09 n/a One beep
311
OFF One beep
/412
312
OFF One beep
/411
309
OFF One beep
/409
801 OFF One beep
n/a Solid RED n/a
n/a Solid RED n/a
n/a Solid RED n/a
Cause Solution
Have repairs performed
PCBA failure by a qualified service
technician.
Inspect the blade
firstly. If it is loosened,
tighten the bolt with
Loose connection
recommended torque.
Otherwise, have
repairs performed by
a qualified service
technician.
Motor failure
PCAB failure
Have repairs performed
by a qualified service
technician.
Loose connection
PCAB failure
Have repairs performed
by a qualified service
technician.
Loose connection
PCBA failure
Have repairs performed
by a qualified service
technician.
Wire/Switch
failure
Have repairs performed
The charging port
by a qualified service
is in open circuit.
technician.
Check the wall outlet
There is no power whether there is
supply. 220 V-240 V supplied or
the socket is good.
Have repairs performed
The fuse is blown. by a qualified service
technician.