Do you have a question about the LM2130SP and is the answer not in the manual?
Questions and answers
Bill Merritt
March 29, 2025
Mower blades not on
1 comments:
Mr. Anderson
March 29, 2025
The mower blades on the Ego Power+ LM2130SP may not be engaging due to the following reasons:
1. The battery pack is depleted — charge the battery. 2. The battery pack is not properly mounted — attach it until it clicks. 3. The battery pack or mower is too hot — allow it to cool below 152°F (67°C). 4. The side rails are not fully extended or the clamps are not locked — extend and lock them. 5. The handle is not in one of the three operating positions — adjust the handle properly. 6. The mower deck is clogged with grass or debris — clean the deck to allow blade movement.
Page 1
OPERATOR'S MANUAL 56-VOLT LITHIUM-ION CORDLESS MOWER Français p. 55 MODEL NUMBER LM2130SP/LM2130SP-FC Español p. 111 LM2130/LM2130-FC WARNING: To reduce the risk of injury, the user must read and understand the Operator’s Manual before using this product. Save these instructions for future reference.
To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
We recommend a Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye protection which is marked to comply with ANSI Z87.1. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
DANGER — Keep Do not mow when children or others Bystanders Away are around. Remove objects that can be thrown by DANGER — Thrown the blade in any direction. Wear safety Debris glasses. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 6
No Load Speed Rotational speed, at no load Revolutions Per Minute Rotational speed Celsius Temperature Temperature Fahrenheit Temperature Temperature WARNING: To ensure safety and reliability, all repairs should be performed by a qualified service technician. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 7
Be completely familiar with the controls and proper use of this machine before operating it. Keep this manual in a safe place for future and regular reference and for ordering replacement parts. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 8
Always wear safety glasses or safety goggles during operation and while performing an adjustment or repair to protect your eyes. Thrown objects that ricochet can cause serious injury to the eyes. Always use a face or dust mask if the operation is dusty. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 9
Stop the blade when crossing gravel drives, walks or roads. ◾ If the equipment should start to vibrate abnormally, immediately stop the motor, remove the battery and check for the cause. Vibration is generally a warning of trouble. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 10
Mow across the face of slopes; never mow up and down. Exercise extreme caution when changing direction on slopes. ◾ Watch for holes, ruts, rocks, hidden objects, or bumps which can cause you to slip or trip. Tall grass can hide obstacles. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 11
Check the blade and motor mounting bolts at frequent intervals for proper tightness. Also, visually inspect the blade for damage (e.g., bending, cracking and wear.). Replace the blade only with the identical replacement blade, as listed in this manual. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 12
Refer to them frequently and use them to instruct others who may use this tool. If you lend this tool to someone else, also lend these instructions to them to prevent misuse of the product and possibly injury. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
THE MODEL AND SERIAL NUMBERS WILL BE FOUND ON A LABEL ATTACHED ON THE REAR DISCHARGE DOOR. YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP IN A SAFE PLACE FOR FUTURE REFERENCE 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
BA4200T/BA4200T-FC Light load 45 min. 60 min. Medium load 35 min. 45 min. Heavy load 20 min. 30 min. NOTICE: The actual running time will vary with grass condition: species, density, moisture, etc. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Use of parts that do not meet the original equipment specifications may lead to improper performance and compromised safety. PART NAME MODEL NUMBER EGO Edge Premium Blade System AB2100D EGO Edge Premium Tri Cut Blade System AB2101D 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Quick-Adjust Lever LED Headlights Spring-loaded Cutting-height Front Handle Adjustment Lever Rear Wheel Support for Upright Storage Mower Deck Front Wheel Support for Upright Storage Trailing Shield Side Discharge Chute Mulching Insert Battery- Release Button 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 17
The shield and the rear door minimize the possibility of accidental foot contact with the blade. DO NOT operate the mower without the trailing shield and rear door in place. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 18
The LED headlights are located on the front of the mower. This feature provides extra light for increased visibility. SPRING-LOADED CUTTING-HEIGHT-ADJUSTMENT LEVER One-handed cutting-height adjustment. ELECTRIC BRAKE Quickly stops blade rotation when the bail switch is released. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Do not discard the packing material until you have carefully inspected and satisfactorily operated the mower. ◾ If any parts are damaged or missing, please return the mower to the place of purchase. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 20
3. Assemble the top clips to the frame, as shown in Fig. 3, then assemble the two side clips. Assemble the bottom clip last. 4. The completely assembled grass bag is shown in Fig. 4. Clips 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 21
Middle Attachment/Removal Operating Position position (Fig. 6). This position allows Position easy access to install and remove Lower the grass bag. Operating Position Locked Storage Position 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 22
The motor cannot be started unless: a) The side rails are fully extended b) Both green handle-locking clamps are securely closed c) The handle is locked into one of the three operating positions. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 23
Under normal usage, the grass bag material is subject to wear. To reduce the risk of injury, frequently inspect the bag assembly and replace the bag if there are any signs of wear or deterioration. Use only grass bags manufactured for this mower. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 24
5. Release the discharge door and make sure it rests firmly against the mulching insert. NOTICE: The mulching insert must be removed in order to install and use the grass bag and must be re-installed when the grass bag is removed. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 25
5. To remove the side-discharge chute, lift the rear-discharge door, grasp the side-discharge chute and pull it out. 6. Release the discharge door and make sure that it rests firmly against the discharge chute. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 26
3. Once arriving at the desired cutting-height position, engage the spring-loaded cutting-height-adjustment lever back into the slot. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
5. Close the battery cover. NOTICE: Make sure that the latch on the mower snaps into place and that the battery pack is secured to the mower before starting operation. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 28
The motor cannot be started unless: ◾ The side rails are fully extended ◾ Both green handle-locking clamps Bail Switch are securely closed (Released position) ◾ The handle is locked into one of the three operating positions. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 29
To stop the mower 1. Fully release the bail switch (Fig. 16). 2. The electric brake in the Automatic Braking Mechanism will stop the blade rotation within 3 seconds of the bail-switch release. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 30
VARIABLE-SPEED SELF-PROPEL SYSTEM (only for LM2130SP/ LM2130SP-FC) LM2130SP/LM2130SP-FC mower is equipped with variable-speed, self-propel capability. To increase the speed, rotate the self-propel-speed-control knob forward. To decrease the speed, rotate the self-propel speed control knob backward. NOTICE: When the self-propel speed...
Page 31
The mower-status indicator will illuminate when the blade is rotating or when the LED headlights are Switch Button for Mower-Status Indicator LED Headlights turned on. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 32
Battery overheat. (See Release the bail switch, section “BATTERY wait until the battery pack Dark & LED on HIGH-TEMPERATURE cools down to approximately battery flashing PROTECTION” in this 152°F (67°C), then restart the manual) mower. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 33
BA2800, BA2800-FC, BA4200, BA4200-FC) will flash orange and the LED on the battery(BA1400T, BA1400T-FC, BA2800T, BA2800T-FC, BA4200T, BA4200T-FC) will shine red. Release the bail switch, wait until the battery pack cools down to approximately 152°F (67°C), then restart the mower. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
2 1/2" (0.75 m) every 10" (3 m)). Mow across the face of a slope and never up and down. Use Fig. 20 as a guide in order to identify slopes that cannot be mowed safety. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
For mulching extremely thick or tall grass, it is advisable to first cut at a high cut-height setting, and then re-cut to the final cut height. Otherwise, make narrower cuts and mow slowly. ALWAYS MAKE SURE THAT THE BLADE IS SHARP. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
This accumulation is undesirable; it will promote rust and corrosion. Remove any build-up of grass and leaves on or around the drive shaft (only LM2130SP/ LM2130SP-FC) and motor fan (do not use water). Wipe the mower clean with a damp cloth.
Page 38
5/16" (8mm) into the fixing hole to act as a stabilizer (Fig. 21). 4. Use a 9/16" (14mm) wrench to turn the outer bolt counterclockwise to loosen it (Fig. 21). 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 39
(Fig.24). NOTICE: Save the two bolts and two Flange nuts for blade reassembly. 7. Sharpen the blades or replace with a new blade set. Blade Set Outer Bolt Bolt 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
22 ft-lb (30Nm). 7. Align the outer flange with the shaft and assemble it into place. 8. Mount the outer bolt onto the shaft and turn it clockwise by hand to pre-tighten it. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 41
Fig.29; fix the two nuts clockwise instead of tightening them and allow some movements between the two blades (Fig.29). 5. Install the blade set following the step 4 to step 10 showed in the “INSTALLING THE BLADE”. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 42
Make sure that the blade remains balanced. ◾ Sharpen the blade at the original cutting angle. ◾ Sharpen the cutting edges on both ends of the blade, removing an equal amount of material from each end. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 43
6. Replace the blade on the mower and tighten it securely (please see INSTALLING THE BLADE). WARNING: An unbalanced blade will cause excessive vibration when rotating at high speeds. It may cause damage to the mower and could break, causing personal injury. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 44
4. Gently pivot the handle toward the front of the mower; release the quick-adjust lever and continue to pivot the handle until you hear and feel the lock pin engage in the locked storage position. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 45
(Fig. 32c). Bearing Bearing ◾ For LM2130SP/LM2130SP-FC For LM2130/LM2130-FC, lubricate the bearings in both the rear and front wheels (Fig. 32d). Bearing Bearing Deck-Height Adjustment Joint Bearing Bearing For LM2130/LM2130-FC 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Bolt worn wheel and assemble it to the Round Recess new wheel with the 3 screws. facing outside Rear Wheel Wave Washer Wheel Axle Rear wheel for LM2130/LM2130-FC 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 47
3. Loosen and remove the three locking screws for the trailing shield; remove the worn trailing shield (Fig. 34). 4. Replace with a new trailing shield and attach it with the three locking screws. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
6. Store the mower in a covered and enclosed space that is cool and dry and out of the reach of children. 7. Do not cover the lawn mower with a solid plastic sheet. Plastic coverings trap moisture around the mower, which causes rust and corrosion. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 49
If the mower to tips over from the upright position, mower damage or personal injury may result. Always keep the mower stable and out of the reach of children when it is in the upright position. If possible, lay it flat for storage. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
-height setting will greatly affect your pace to reduce the cutting time of the the battery run time. The claimed load. mower with run time is based on a light load included condition. battery 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 51
Raise the deck to a higher grass at once. cutting-height setting. ◾ ◾ The handle- The side rails are not fully Fully extend the side rails, then extended. lock the clamps. locking clamps cannot be closed in position 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 52
The motor The blade is not tightened to the Re-tighten the blade. The required torque. recommended torque for the works but the blade bolt is 36-43 ft-lb (49- blade doesn’t 59Nm). cut the grass 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
90/30 days from manufacture defects in normal working conditions. d) This warranty is void if the product has been used for rental purpose. e) This warranty does not cover the damage resulting from modification, alteration or unauthorized repair. 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 54
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. For customer service contact us toll-free at: 1-855-EGO-5656 or EGOPOWERPLUS. COM. EGO Customer Service, 769 SEWARD AVE NW / Suite 102 Grand Rapids, MI 49504 56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 55
GUIDE D’UTILISATION TONDEUSE SANS FIL AU LITHI- UM-ION DE 56 VOLTS NUMÉRO DE MODÈLE LM2130SP/LM2130SP-FC/LM2130/LM2130-FC AVERTISSEMENT : Afin de réduire les risques de blessure, l’utilisateur doit lire et comprendre le guide d’utilisation avant d’utiliser ce produit. Conservez le présent guide afin de pouvoir le consulter ultérieurement.
Page 56
Garantie ......... . 109-110 TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 57
Pour réduire votre exposition à ces produits chimiques, travaillez dans une zone bien ventilée et portez l’équipement de sécurité approuvé, comme les masques antipoussière reconnus spécialement pour ne pas laisser passer les particules microscopiques. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 58
Nous recommandons le port d’un masque de sécurité panoramique par-dessus les lunettes ou de lunettes de sécurité standard avec écrans latéraux. Portez toujours un équipement de protection oculaire conforme à la norme ANSI Z87.1. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 59
Remplacez immédiatement les pièces endommagées. N’utilisez pas cette tondeuse en DANGER – Maintenez présence d’enfants ou d’autres toute personne à l’écart personnes. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 60
Volt Tension Type de courant ou Courant continu caractéristique de courant Millimètre Longueur ou taille Pouce Longueur ou taille Kilogramme Poids Livre Poids Litre Volume Boisseau Volume Minutes Durée TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 61
Température Température en Fahrenheit Température AVERTISSEMENT : Pour assurer la sécurité et la fiabilité de l’appareil, toutes les réparations doivent être effectuées par un technicien en entretien et en réparation qualifié. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 62
être formés et supervisés par un parent. Seules les personnes responsables qui connaissent les règles d’utilisation sécuritaire devraient être autorisées à utiliser cet appareil. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 63
Ne forcez pas la tondeuse – elle vous permettra d’accomplir le travail pour lequel elle a été conçue plus efficacement et avec plus de sécurité si vous l’utilisez au rythme approprié. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 64
De nombreuses blessures surviennent lorsque la tondeuse passe sur le pied de l’utilisateur qui glisse ou trébuche et fait une chute. En cas de chute, ne retenez pas la tondeuse; lâchez immédiatement la poignée. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 65
Ne placez jamais une partie du corps à proximité de la lame tant que vous n’êtes pas certain que la lame a cessé de tourner. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 66
Des herbes hautes peuvent dissimuler des obstacles. À ne pas faire : ◾ Ne tondez pas près d’une falaise, d’un fossé ou d’un remblai; vous pourriez perdre pied ou perdre l’équilibre. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 67
De plus, effectuez une inspection visuelle des lames pour vérifier qu’elles ne sont pas endommagées (par exemple, tordues, fissurées ou usées). Remplacez la lame uniquement avec une lame de rechange identique à celle indiquée dans ce guide. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 68
à d’autres personnes qui l’utiliseraient.Si vous prêtez cet outil à une personne, prêtez-lui également ces instructions afin de prévenir un usage inapproprié et des blessures potentielles. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 69
AU CLAPET D’ÉVACUATION ARRIÈRE. NOUS VOUS RECOMMANDONS DE PRENDRE EN NOTE LE NUMÉRO DE SÉRIE ET LA DATE D’ACHAT ET DE LES CONSERVER EN LIEU SÛR AFIN DE POUVOIR LES CONSULTER ULTÉRIEUREMENT. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 70
Température de stockage -20°C-70°C(-4°F-158°F) recommandée Durée d’utilisation approximative LM2130/LM2130-FC avec LM2130SP/LM2130SP-FC avec BA2800T/BA2800T-FC BA4200T/BA4200T-FC Charge légère 45 min. 60 min. Charge moyenne 35 min. 45 min. Forte charge 20 min. 30 min. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 71
NUMÉRO DE MODÈLE Système de lame de qualité supérieure AB2100D pour tondeuse à gazon ego edge Système de lame de qualité supérieure à AB2101D triple coupe pour tondeuse à gazon edge TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 72
Roue arrière Support pour remisage à la verticale Plateau de coupe Roue avant Support pour remisage à la verticale Écran postérieur Sortie d’évacuation latérale Bouton Raccord pour d’éjection du déchiquetage bloc-pile TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 73
L’interrupteur de désengagement et la bouton sont des dispositifs de sécurité. Ne tentez jamais de contourner leur fonctionnement. PINCE DE CERROUILLAGE DE LA POIGNÉE Verrouille / déverrouille les rails latéraux en position étendue ou en retrait. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 74
LEVIER À RESSORT POUR RÉGLER LA HAUTEUR DE COUPE Réglage de la hauteur de coupe d’une seule main. FREIN ÉLECTRIQUE Arrête rapidement la rotation de la lame lorsque l’interrupteur de désengagement est relâché. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 75
Ne jetez pas le matériel d’emballage avant d’avoir inspecté soigneusement la tondeuse et de l’avoir fait fonctionner de manière satisfaisante. ◾ S’il y a des pièces manquantes ou endommagées, veuillez retourner la tondeuse à l’endroit où vous l’avez achetée. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 76
Fig. 3, puis fixez les deux attaches latérales. Fixez ensuite l’attache inférieure. 4. La Fig. 4 illustre le sac de déchets de coupe complètement assemblé. Attaches TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 77
Position verrouillée pour (Fig. 6). Cette position permet un le remisage accès facile pour installer et retirer le sac de déchets de coupe. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 78
Position de fonctionnement. Étendre complètement les rails latéraux et bien fermer les deux poignées pinces (Fig. 7 et 8). TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 79
à la barre de pivot et que le clapet d’évacuation arrière ne repose pas fermement sur le dessus du sac de déchets de coupe. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 80
AVERTISSEMENT : Vous devez enlever le raccord pour déchiquetage avant d’installer et d’utiliser le sac de déchets de coupe, puis vous devez le remettre en place lorsque vous enlevez le sac. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 81
5. Pour enlever la sortie d’évacuation latérale, soulevez le clapet d’évacuation arrière, saisissez la sortie d’évacuation latérale et tirez-la vers l’extérieur. 6. Relâchez le clapet d’évacuation et assurez-vous qu’il repose fermement sur la sortie d’évacuation. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 82
3. Une fois arrivé à la position de hauteur de coupe souhaitée, engagez le levier de réglage de la hauteur de coupe à ressort dans la fente. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 83
5. Fermez le couvercle du bloc-pile. AVERTISSEMENT : Avant d’utiliser l’appareil, assurez-vous que le verrou de la tondeuse se loge en place et que le bloc-pile est bien fixé. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 84
◾ les deux pinces vertes de verrouillage de la poignée ne sont pas bien fermées; ◾ La poignée est verrouillée dans l’une des trois positions d’utilisation. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 85
1. Relâchez l’interrupteur de désengagement (Fig. 16). 2. Le frein électrique du mécanisme de freinage automatique arrêtera la rotation de la lame dans les trois secondes suivant le relâchement de l’interrupteur de désengagement. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 86
SYSTÈME AUTOMOTEUR À VITESSE VARIABLE (uniquement sur la LM2130SP/LM2130SP-FC)) Les tondeuses LM2130SP et LM2130SP-FC sont équipées d’un système automoteur à vitesse variable. Pour augmenter la vitesse, tournez le bouton de réglage de la vitesse du système automoteur vers l’avant. Pour augmenter la vitesse, tournez le bouton de réglage de la vitesse du système automoteur vers l’arrière.
Page 87
Appuyez sur l’interrupteur pour allumer les phares (Fig. 18). Les phares fournissent un éclairage brillant à l’avant de la tondeuse. Appuyez de nouveau sur l’interrupteur pour éteindre les phares. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 88
L’indicateur de mise en marche s’allume lorsque la lame tourne ou lorsque les phares à DEL sont allumés. Interrupteur des Indicateur de mise en phares à DEL marche TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 89
à la clientèle d’EGO. Clignote Communiquez avec le centre de successivement en Erreur service à la clientèle d’EGO. rouge et en vert TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 90
(BA1400T, BA1400T-FC, BA2800T, BA2800T-FC, BA4200T, BA4200T-FC) s’illuminera en rouge. Relâchez la poignée de désengagement, attendez que le bloc-pile ait refroidi jusqu’à une température d’environ 67 °C (152 °F), puis redémarrez la tondeuse. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 91
15°, ce qui correspond à un dénivelé d’environ 0,75 m (2,5 pi) tous les 3 m (10 pi). Travaillez parallèlement à la pente, jamais perpendiculairement. Utilisez la Fig. 20 pour vous aider à déterminer s’il est possible de tondre en toute sécurité sur une pente. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 92
TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 93
Pour assurer la sécurité et la fiabilité de l’appareil, toutes les réparations doivent être effectuées par un technicien en entretien et en réparation qualifié. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 94
Éliminez l’accumulation de brins d’herbe et de feuilles sur l’arbre d’entraînement (uniquement sur la LM2130SP/LM2130SP-FC) et le ventilateur du moteur, ou autour de ceux-ci (évitez d’utiliser de l’eau). Utilisez un linge humide pour nettoyer la tondeuse.
Page 95
REMARQUE : Conserver les deux boulons et les deux écrous pour Boulon pouvoir remonter la lame. 7. Affûtez les lames ou remplacez- les par un ensemble de nouvelles lames. Écrou TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 96
7. Alignez la bride externe sur l’arbre et fixez-la en place. 8. Insérez le boulon externe dans l’arbre et tournez-le manuellement dans le sens des aiguilles d’une montre pour le serrer partiellement. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 97
(Fig. 29). 5. Installez le jeu de lames en suivant les étapes 4 à 10 indiquées sous la rubrique “INSTALLATION DE LA LAME”. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 98
◾ Affûtez la lame en suivant l’angle original de coupe. ◾ Affûtez les bords coupants aux deux extrémités de la lame, en enlevant une quantité égale de matériau de chaque extrémité. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 99
INSTALLATION DE LA LAME). AVERTISSEMENT : Une lame déséquilibrée peut causer des vibrations excessives lorsqu’elle tourne à vitesse élevée.Elle risque d’endommager la tondeuse, de se briser et de causer des blessures. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 100
4. Faites pivoter la poignée doucement vers l’avant de la tondeuse; relâchez le levier de réglage rapide et continuez à faire pivoter la poignée jusqu’à ce que vous sentiez que l’ergot d’arrêt s’enclenche en position verrouillée pour le remisage et que vous l’entendiez. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 101
For LM2130SP/LM2130SP-FC Pour la LM2130/LM2130-FC, graissez les roulements des roues arrière et des roues avant (Fig. 32d). Roulement Roulement Joint de réglage de la hauteur du plateau Roulement Roulement For LM2130/LM2130-FC TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 102
Encoche ronde orientée vers l’extérieur roue usée et fixez-le à la nouvelle Roue arrière roue à l’aide de 3 vis. Rondelle ondulée Essieu de roue Roue arrière pour LM2130/LM2130-FC TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 103
(Fig. Vis de blocage 34). du couvercle 4. Replacez le nouvel écran postérieur et fixez-le à l’aide des trois vis de blocage. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 104
7. Ne couvrez pas la tondeuse d’une feuille de plastique solide. Les couvertures de plastique emprisonnent l’humidité autour de la tondeuse, ce qui cause de la rouille et de la corrosion. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 105
Assurez-vous que la tondeuse est toujours stable et hors de portée des enfants lorsqu’elle est en position verticale. Dans la mesure du possible, remisez-la à plat. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 106
Augmentez la hauteur du inégale réglée correctement. plateau. ◾ ◾ La lame n’est pas fixée Remontez la lame, en correctement. consultant la section INSTALLATION DE LA LAME de ce guide. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 107
La barre latérale est légèrement Déverrouillez les pinces. rétractée par la force exercée sur la Allongez complètement les poignée lors de l’enfoncement. barres latérales et verrouillez de nouveau les pinces. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 108
49 à mais la lame 59 N.m (36 à 43 lb-pi). ne coupe pas l’herbe. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 109
Ces pièces sont couvertes contre les défauts de fabrication pour une période de 90 jours ou de 30 jours si elles sont utilisées dans des conditions de travail normales. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 110
Pour communiquer avec le service à la clientèle, veuillez composer le numéro sans frais suivant : 1 855 EGO-5656 ou consulter le site Web EGOPOWERPLUS.COM. EGO Customer Service, 769 SEWARD AVE NW / Suite 102 Grand Rapids, MI 49504, États-Unis. TONDEUSE SANS FIL AU LITHIUM-ION DE 56 VOLTS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 111
MANUAL DE OPERACIONES CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS MODELO NÚMERO LM2130SP/LM2130SP-FC/LM2130/LM2130-FC ADVERTENCIA: Para reducir el riesgo de lesiones, el usuario debe leer y comprender el Manual del usuario antes de usar el producto. Guarde estas instrucciones para consultarlas en el futuro.
Page 112
Garantía ......... . 165-167 CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 113
Medidas para reducir la exposición a estos químicos: Trabaje en un área bien ventilada y con el equipo de seguridad aprobado, como las máscaras antipolvo especialmente diseñadas para filtrar partículas microscópicas. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 114
Use siempre protección ocular con la marca de cumplimiento de la norma ANSI Z87.1. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
En caso de daño, reemplácelas inmediatamente. PELIGRO: Mantenga a No corte el césped si hay niños u otras personas alejadas otras personas cerca. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 116
Voltios Voltaje Corriente continua Tipo o característica de corriente Milímetros Largo o tamaño Pulgadas Largo o tamaño Kilogramos Peso Libras Peso Litros Volume Bushel Volumen Minutos Tiempo CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 117
Velocidad de rotación, sin carga Revoluciones por minuto Velocidad de rotación Temperatura Celsius Temperatura Temperatura Fahrenheit Temperatura ADVERTENCIA: Para garantizar la seguridad y confiabilidad, todas las reparaciones las debe realizar un técnico calificado. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 118
Solo deben usar esta máquina las personas responsables que conozcan estas reglas para operarla de modo seguro. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 119
Además, evite descargar el material contra paredes u obstáculos que puedan hacer que el material descargado rebote y regrese hacia el usuario. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 120
Aléjese un paso hacia atrás para poder extender completamente los brazos. ◾ Asegúrese de estar bien parado, con los pies firmes. ◾ Mueva la cortadora hacia atrás lentamente, hasta no más de la mitad del recorrido de sus brazos. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 121
◾ Si se presentan situaciones que no están previstas en este manual, tenga cuidado y use el sentido común. Comuníquese con el Servicio al Cliente de EGO para recibir ayuda. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 122
No pode si el indicador de pendientes indica que la pendiente es superior a los 15 grados. ◾ No pode el césped si está mojado. Un punto de apoyo inestable podría provocar resbalones. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 123
Además, inspeccione visualmente la cuchilla para controlar que no haya daños (por ejemplo, dobladuras, rajaduras y desgastes). Reemplace la cuchilla solamente con una cuchilla de repuesto idéntica a la que se indica en este manual. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 124
CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 125
EL NÚMERO DE SERIE Y DE MODELO PUEDEN CONSULTARSE EN LA ETIQUETA ADJUNTA A LA PUERTA DE DESCARGA POSTERIOR. DEBE ANOTAR EL NÚMERO DE SERIE Y LA FECHA DE COMPRA, Y CONSERVARLOS EN UN LUGAR SEGURO PARA CONSULTARLOS EN EL FUTURO. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 126
Peso de la podadora (sin paquete de baterías;con el 50,3 lbs. (22.8 Kg) 55,3 lbs. (25.1 Kg) accesorio para compuesto orgánico) Temperatura de 0°C-40°C(32°F-104°F) funcionamiento recomendada Temperatura de almacenamiento -20°C-70°C(-4°F-158°F) recomendada CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 127
MODELO NÚMERO Sistema de cuchilla de cortadora de césped edge ego AB2100D premium de 21 pulgadas Sistema de cuchilla de cortadora de césped edge tricorte AB2101D premium de 21 pulgadas CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 128
Soporte para guardar en posición vertical Plataforma de la Rueda frontal cortadora Soporte para guardar en posición Protección vertical posterior Conducto lateral de descarga Botón de Accesorio de liberación de la trituración batería CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 129
El interruptor de seguridad y la botón de seguridad son dispositivos de seguridad. Nunca intente alterar el funcionamiento de estos dispositivos. PINZA DE CIERRE DE MANIJAS Bloquea / desbloquea los rieles laterales en la posición extendida o empotrada CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 130
PALANCA DE AJUSTE DE ALTURA DE CORTE ACCIONADA POR RESORTES Le permite regular la altura de corte con una mano. FRENO ELÉCTRICO Detiene el giro de la cuchilla rápidamente cuando se suelta el interruptor de seguridad. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 131
No deseche el embalaje hasta que no haya inspeccionado cuidadosamente la cortadora y sepa que funciona correctamente. ◾ Si hay alguna pieza dañada o faltante, devuelva la cortadora al lugar donde la compró. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 132
Fig. 3, luego ensamble los dos sujetadores laterales. Finalmente, ensamble el sujetador inferior. 4. En la Fig. 4, se muestra la bolsa recolectora completamente ensamblada. Sujetadores CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 133
(Fig. 6). Esta posición permite un acceso fácil para colocar o quitar la bolsa recolectora. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 134
(Fig. 7 y 8). NOTA: Antes de encender el motor, debe seguir los siguientes pasos: a) Extienda completamente los rieles laterales. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 135
Para reducir el riesgo de lesiones, revise el ensamblaje de la bolsa con frecuencia y reemplácela ante cualquier signo de desgaste o deterioro. Use solamente bolsas recolectoras fabricadas para esta cortadora. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 136
5. Suelte la puerta de descarga y asegúrese de que quede apoyada firmemente contra el accesorio de trituración. AVISO: Para instalar y usar la bolsa recolectora, debe quitar el accesorio de trituración y volverlo a colocar después de quitar la bolsa recolectora. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 137
5. Para quitar el conducto lateral de descarga, levante la puerta posterior de descarga, tómelo y jálelo hacia afuera. 6. Suelte la puerta de descarga y asegúrese de que quede apoyada firmemente contra el conducto de descarga. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 138
3. Una vez que llegue a la posición de altura de corte deseada, vuelva a introducir la palanca de ajuste de altura de corte accionada por resortes en la ranura. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 139
AVISO: Asegúrese de que las aletas de la cortadora encajen en su lugar y que el paquete de baterías esté bien colocado en la cortadora antes de comenzar a operar. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 140
Extienda completamente los rieles (posición inactiva) laterales. ◾ Asegúrese de trabar ambas abrazaderas verdes de sujeción de la empuñadura. ◾ La manija está trabada en una de las tres posiciones para operar. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 141
1. Suelte el interruptor de seguridad (Fig. 16). 2. Después de 3 segundos de haber soltado el interruptor de seguridad, el freno eléctrico del mecanismo de freno automático detendrá la rotación de la cuchilla. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 142
SISTEMA DE LIBERACIÓN AUTOMÁTICA DE VELOCIDAD VARIABLE (solo para LM2130SP/LM2130SP-FC) Las podadoras LM2130SP/LM2130SP-FC tienen la función de liberación automática de velocidad variable. Para aumentar la velocidad, gire la perilla de control de velocidad de la liberación automática hacia delante. Para disminuir la velocidad, gire la perilla de control de velocidad de la liberación automática hacia atrás.
Page 143
Botón interruptor El indicador de encendido se iluminará Indicador de encendido de las luces LED cuando la cuchilla esté girando o cuando las luces de trabajo LED se enciendan. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 144
Si esto no funciona, póngase en contacto con el centro de servicio al cliente de EGO. Rojo/verde Póngase en contacto con el intermitente Error centro de servicio al cliente de alternadamente EGO. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 145
BA2800T-FC, BA4200T, BA4200T-FC) se encenderá en rojo. Suelte la empuñadura de seguridad, espere hasta que el paquete de baterías se enfríe hasta alcanzar aproximadamente los 152 °F (67 °C) y luego, vuelva a encender la cortadora. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 146
(una elevación de aproximadamente 2 1/2 pulg [0,75 m] cada 10 pulg [3 m]). Corte de forma transversal a la pendiente y nunca hacia arriba ni hacia abajo. Use Fig. 20 como guía para identificar las pendientes que no pueden cortarse de modo seguro. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 147
CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 148
Otra opción es realizar cortes más angostos y llevarlos a cabo lentamente. ASEGÚRESE SIEMPRE DE QUE LA CUCHILLA ESTÉ AFILADA. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 149
óxido y corrosión. Retire el césped y las hojas acumuladas en el eje de la unidad o a su alrededor (solo LM2130SP/ LM2130SP-FC) y el ventilador del motor (sin usar agua). Limpie la podadora con un paño húmedo.
Page 150
(Fig. 21). 4. Use una llave de 9/16 pulg (14 mm) para girar la tuerca de la cuchilla en dirección contraria a las manecillas del reloj para desajustarla. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 151
(Fig. 24). AVISO: Guarde los dos pernos y Perno las dos tuercas para reensamblar la cuchilla. 7. Afile las cuchillas o reemplácelas con un nuevo juego de cuchillas. Nuez CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 152
6. Utilice una llave de torsión de 43/64 de pulgada (17 mm) para apretar las dos tuercas. La fuerza de torsión recomendada es 22 pies-lb (30 Nm). 7. Alinee la brida externa con el eje y ensámblela en su lugar. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 153
(Fig. 29). 5. Instale la cuchilla siguiendo el paso 4 al paso 10 que se muestra en “CÓMO INSTALAR LA CUCHILLA”. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 154
Afile la cuchilla en el ángulo de corte original. ◾ Afile los bordes de corte en ambos extremos de la cuchilla y quite la misma cantidad de material en ambos extremos. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 155
“CÓMO INSTALAR LA CUCHILLA”). ADVERTENCIA: Si la cuchilla no tiene simetría, vibrará excesivamente cuando gire a alta velocidad.Puede provocar daños a la cortadora, y esta se puede romper y causar lesiones personales. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 156
4. Gire suavemente la manija hacia el frente de la podadora, suelte la palanca de ajuste rápido y siga girando la manija hasta que escuche y sienta que el pasador de bloqueo se engancha en la posición de bloqueo para almacenaje. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 157
Para el modelo LM2130/LM2130-FC lubrique los cojinetes de las ruedas posteriores y delanteras (Fig. 32d). Cojinete Cojinete La junta de ajuste de la altura de la plataforma Cojinete Cojinete For LM2130/LM2130-FC CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 158
Cubierta Antipolvo rueda nueva con los 3 tornillos. Perno Cavidad Circular Mirando Hacia El Exterior Rueda Posterior Arandela Ondulada Eje De La Rueda Rueda posterior para LM2130/ LM2130-FC CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 159
Tornillo de posterior desgastada (Fig. 34). seguridad de cubierta de la 4. Reemplácela con una protección rueda posterior nueva y fíjela con los tres tornillos de seguridad. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 160
7. No cubra la cortadora con una cubierta de plástico duro. Las cubiertas plásticas no dejan salir la humedad de la cortadora, lo que puede generar óxido y corrosión. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 161
Mantenga siempre la cortadora en una posición estable y fuera del alcance de los niños si la guarda en posición vertical. Si fuera posible, guarde la cortadora en posición horizontal. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 162
◾ ◾ La cuchilla no está bien ensamblada. Vuelva a ensamblar la cuchilla siguiendo las instrucciones que figuran en la sección “CÓMO COLOCAR LA CUCHILLA” de este manual. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 163
Destrabe las abrazaderas. El riel lateral está un poco retraído Extienda completamente los debido a la rieles laterales y vuelva a presión que se ejerce sobre la trabar las abrazaderas. empuñadura. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 164
Vuelva a apretar la hoja. El torque requerido. torque recomendado para el funciona, pero perno de la hoja es de 4,97 a la hoja no corta 5,94 kgf-m (49 a 59 Nm). el césped. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 165
Estas piezas tienen cobertura durante 90/30 días por defectos de fabricación en condiciones normales de trabajo. d) Esta garantía queda nula si el producto se ha puesto en alquiler. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 166
Esta garantía le otorga derechos legales específicos, pero podría tener también otros derechos que varían según el estado. CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Page 167
Para obtener el servicio al cliente, póngase en contacto con nosotros de manera gratuita al: 1-855-EGO-5656 o visite: EGOPOWERPLUS.COM EGO Customer Service, 769 SEWARD AVE NW / Suite 102 Grand Rapids, MI 49504 CORTADORA INALÁMBRICA DE IONES DE LITIO DE 56 VOLTIOS — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC...
Need help?
Do you have a question about the LM2130SP and is the answer not in the manual?
Questions and answers
Mower blades not on
The mower blades on the Ego Power+ LM2130SP may not be engaging due to the following reasons:
1. The battery pack is depleted — charge the battery.
2. The battery pack is not properly mounted — attach it until it clicks.
3. The battery pack or mower is too hot — allow it to cool below 152°F (67°C).
4. The side rails are not fully extended or the clamps are not locked — extend and lock them.
5. The handle is not in one of the three operating positions — adjust the handle properly.
6. The mower deck is clogged with grass or debris — clean the deck to allow blade movement.
This answer is automatically generated