Wi-Fi (Option) - Delta M30A 231 Operation And Installation Manual

Installation
3.6.5 Wi-Fi
The communication module supports the inverter to communicate with devices
(such as smartphones, tablets, etc.) via Wi-Fi (base WPA2-PSK).
User can restart the function through the APP or DSS.
There is an antenna for Wi-Fi in the package (item 8,Table 2-1), which must be
mounted on the plastic carrier as the procedure below.
1. Remove the protective nut.
2. Tighten the antenna.
- Please properly install the antenna as shown below to keep communication
quality and avoid equipment damage.
- More detail for Wi-Fi connection and APP :
https://mydeltasolar.deltaww.com/index.php?p=manual
To establish a successful communication between Inverter Wi-Fi to MyDeltaSolar
-
Cloud, in the Wi-Fi connection setup page, the signal strength must be above
-70dBm between each Wi-Fi device (Wi-Fi router, inverter, DC1...etc.). In case
the signal strength is below -70dbm, it may cause certain communication errors
which may prevent a successful Wi-Fi communication. To avoid such issues,
please adjust the Wi-Fi device position to improve the signal strength/quality.
Figure 3-24: Installation of Wi-Fi antenna
ATTENTION
38