Table of Contents
Advertisement
Quick Links
Freescale Semiconductor
User Guide
S12ZVC Evaluation Board Quick
Start Guide
MagniV Mixed-signal MCUs
by: Jesús Sánchez, Luis Olea
1 Introduction and default
settings
This guide shows how to quickly connect the board to a host
PC and execute a demonstration application preloaded in to
the flash memory.
The S12ZVC MCU integrates:
• S12Z CPU
• Power supply
• PNP external ballast transistor for VDDX, VDDA,
and VDDC
• LED power indicators
• Reset
• LEDs
• Buzzer
• ADC potentiometer
• Keyboard matrix
• High-voltage input
• Sensors
• Temperature and humidity
• Pressure sensor
• Inertial sensor SPI X-Y axis
• SENT
• CAN
• LIN
Default jumper positions of the VLG-S12ZVC board are
shown in the following section.
© 2014 Freescale Semiconductor, Inc.
Non-Disclosure Agreement required
Document Number:S12ZVCEBQSG
Contents
1
Introduction and default settings...............................1
2
Device overview S12ZVC family.............................2
3
Jumper default configuration.....................................2
4
Software tools installation.........................................4
4.1
studio..............................................................4
4.2
Launch the demo program.............................4
5
Jumper list and description........................................5
6
Headers and connectors list.......................................8
7
Peripheral list............................................................9
8
References...............................................................10
9
Revision history......................................................10
Rev 0, 01/2014
Advertisement
Table of Contents
Related Manuals for Freescale Semiconductor S12ZVC
Summary of Contents for Freescale Semiconductor S12ZVC
-
Page 1: Table Of Contents
• Temperature and humidity • Pressure sensor • Inertial sensor SPI X-Y axis • SENT • CAN • LIN Default jumper positions of the VLG-S12ZVC board are shown in the following section. © 2014 Freescale Semiconductor, Inc. Non-Disclosure Agreement required... -
Page 2: Device Overview S12Zvc Family
1. Block Diagram shows the maximum configuration. Not all pins or all peripherals are available on all devices and packages. Rerouting options are not shown. S12ZVC Evaluation Board Quick Start Guide, Rev 0, 01/2014 Freescale Semiconductor, Inc. Non-Disclosure Agreement required... - Page 3 1-2, 3-4, 5-6, 7-8, 9-10, 11-12, 13-14, 15-16 1, 2 1, 2 1, 2 1, 2 1-2, 3-4, 5-6, 7-8 1, 2 1- 2 Table continues on the next page... S12ZVC Evaluation Board Quick Start Guide, Rev 0, 01/2014 Freescale Semiconductor, Inc. Non-Disclosure Agreement required...
-
Page 4: Software Tools Installation
1- 2 1- 2 4 Software tools installation This section describes how to get started with the S12ZVC board by installing CodeWarrior development studio and testing the demo program that comes programmed with the board. 4.1 Install CodeWarrior development studio Freescale’s CodeWarrior for MCUs integrates the development tools for several architectures, including the S12Z... -
Page 5: Jumper List And Description
Jumper list and description 5 Jumper list and description The following table lists all of the jumpers in the S12ZVC evaluation board and its corresponding configuration options. Table 2. Jumpers description Jumper Description HVI Circuit –Reference Voltage Selector Pin 1-2 - SW1 is connected to VBAT level. - Page 6 PT1. VDDX Closing this jumper connects VDDX to VDD_OUT line. VDDC Closing this jumper connects VDDC to VDDC_OUT line. Table continues on the next page... S12ZVC Evaluation Board Quick Start Guide, Rev 0, 01/2014 Freescale Semiconductor, Inc. Non-Disclosure Agreement required...
- Page 7 Closed Pin 11-12 Closing this jumper connects PAD13 port to the keyword matrix. Closed Table continues on the next page... S12ZVC Evaluation Board Quick Start Guide, Rev 0, 01/2014 Freescale Semiconductor, Inc. Non-Disclosure Agreement required...
-
Page 8: Headers And Connectors List
Closing this jumper connects VDDX to D4, D6, D13, and D15. 6 Headers and connectors list The following table lists all of the connectors available in the S12ZVC evaluation board and their corresponding signals. Table 3. Connectors description Header / Connector... -
Page 9: Peripheral List
Emitter. Opening J18, J19, and J25 connects the user to an additional transistor for validation. Main power connector (up to 18 V) 7 Peripheral list The following table lists all the peripherals available in the S12ZVC evaluation board. Table 4. Peripheral description Peripheral MCU PORT... -
Page 10: References
Reset switch 8 References For further reference, the following documents are available at freescale.com. 1. AN4851: Using the High Resolution Timer and PWM in the S12ZVC (AN4851) 2. AN4852: Using the SENT Transmitter Module in S12ZVC Devices (AN4852) 9 Revision history... - Page 11 Flexis, Layerscape, MagniV, MXC, Platform in a Package, QorIQ Qonverge, QUICC Engine, Ready Play, SafeAssure, SafeAssure logo, SMARTMOS, Tower, TurboLink, Vybrid, and Xtrinsic are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © 2014 Freescale Semiconductor, Inc.