Table of Contents
Advertisement
14
Finalizing the Installation
Nailing Brackets
The fireplace has nailing brackets on both sides. Once in place, secure the fireplace to the framing.
NOTE: Make sure the fireplace is square and plumb when securing the fireplace.
SPECIAL NOTE WHEN USING "SUBMERGED FACING" OPTION
Most installations use the "Standard Facing" position for the nailing brackets. When using the
"Submerged Facing" option, the fireplace is positioned ½" to the rear. Make sure to accommodate
this dimension when configuring framing and determining the vent position, gas line position, etc.
Bend the nailing brackets out
and secure to the side framing.
Additional nailing brackets are provided
along the base of the fireplace. Use these
brackets if not using the front brackets.
Standard Facing
(drywall contacts side of fireplace)
a
Submerged Facing
(Drywall butts against non-
combustible facing)
a
© Travis Industries
b
c
b
Rotate the bracket on the
rivet 180 degrees.
6/28/2019 - 1499
(for qualified installers only)
Fireplace
WARNING:
Do not install combustible
material (drywall) in front of
the fireplace.
Fireplace
Non-Combustible Facing
1/2" (13mm) Drywall
1/2" (13mm) Drywall
864 40K CF Install Aust
Advertisement
Table of Contents
