Care And Maintenance; Responsible Disposal; Specifications - Cocraft HR 710 Original Instructions Manual

Care and maintenance

• Unplug the mains lead before carrying out any maintenance, repairs or service.
• Make sure that the motor's ventilation openings are never clogged.
• Clean the rotary hammer drill using a lightly moistened cloth. Only use mild
cleaning agents, never solvents or corrosive chemicals.
• Store the rotary hammer in its storage case and out of the reach of children.

Responsible disposal

This symbol indicates that this product should not be disposed of with
general household waste. This applies throughout the entire EU. In order
to prevent any harm to the environment or health hazards caused by
incorrect waste disposal, the product must be handed in for recycling
so that the material can be disposed of in a responsible manner. When
recycling your product, take it to your local collection facility or contact
the place of purchase. They will ensure that the product is disposed of in
an environmentally sound manner.

Specifications

Rated voltage
Power
No-load speed
Impact rate
Impact force
Noise level
Vibration
(main handle)
Vibration
(aux handle)
Max drill bit size
Chuck
Weight
220−240 V, 50 Hz
710 W
930 rpm
5000 bpm
2.6 J
LwA 96,8 dB(A), K:3 dB(A)
LpA 85,8 dB(A), K:3 dB(A)
a h,ID 18,582 m/s², K: 1.5 m/s² (drilling with hammer action)
a h,CHeq 16,069 m/s², K: 1.5 m/s² (chiselling)
a h,ID 12,926 m/s², K: 1.5 m/s² (drilling with hammer action)
a h,CHeq 9,649 m/s², K: 1.5 m/s² (chiselling)
Steel 13 mm
Wood 40 mm
Concrete 26 mm
SDS-plus
3.3 kg
9