Overview Of Product - Hach LANGE LICO 500 User Manual

General Information

2.2 Overview of product

8
Normal operation of this instrument may involve the use of
hazardous chemicals or biologically harmful samples.
• The user must observe all cautionary information printed on the
original solution containers and safety data sheet prior to their use.
• All waste solutions must be disposed in accordance with local and
national law.
• The type of protective equipment must be selected according to
the concentration and amount of the dangerous substance at the
specific workplace.
The LICO 500 is a VIS spectrophotometer with a wavelength range
of 320 to 1100 nm. The instrument comes with a complete set of
application programs and multi-language support.
The LICO 500 contains the following application modes: Color
scales (pre installed), Single Wavelength Mode, Multi-Wavelength
Mode, Wavelength Scan and Time Course Mode.
The LICO 500 provides digital readouts in direct concentration
units, absorbance or percent transmittance.
The LICO 500 can carry out an exact colorimetric evaluation in
conformity with ISO/ASTM standards with just a single
measurement and display the result in terms of traditional color
systems such as Iodine, Hazen or Gardner color numbers.
Besides the 20 color indexes, transmittance and absorbance can
be measured at individual wavelengths, so that the LICO 500 can
also be universally used for analytical purposes in the laboratory.