Table of Contents
Advertisement
en Familiarising yourself with your appliance
If the cooking time is relatively long, you can switch
the appliance off 10 minutes before the cooking time
ends.
¡ There will be enough residual heat to finish cooking
the dish.
Remove any accessories that are not being used from
the cooking compartment.
¡ Accessories that are not being used do not need to
be heated.
4 Familiarising yourself with your appliance
4.1 Control panel
You can use the control panel to configure all functions
of your appliance and to obtain information about the
operating status.
Note: On certain models, specific details such as col-
our and shape may differ from those pictured.
1
4.2 Buttons
Use the buttons on the left- and right-hand side of the control panel to switch your device or the operating mode on
and off.
Button
Function
On/off
Menu
Information
Childproof lock
Time-setting options
Rapid heat-up
Start/stop
Opening the control
panel
6
3
2
1
Use
Switch the appliance on or off.
Open the operating mode menu
Display notifications Activate and deactivate the childproof lock
Activate and deactivate the childproof lock
Press briefly: Start or pause operation.
Press and hold for approx. three seconds: Cancel operation.
Switch rapid heat-up on and off
Start, pause or cancel the operation
Open the control panel to remove the water tank.
Allow frozen food to defrost before cooking.
¡ This saves the energy that would otherwise be re-
quired to defrost it.
Note:
The appliance requires:
¡ A maximum of 1 W when the appliance is in opera-
tion with the display switched on
¡ A maximum of 0.5 W when the appliance is in oper-
ation with the display switched off
1
Buttons
The buttons on the left- and right-hand side of
the control panel have a pressure point. Press
a button to execute its function. On appliances
without a stainless steel front, the buttons are
also touch fields.
2
Rotary selector
You can turn the rotary selector without limits
clockwise or anti-clockwise.
Touch fields are touch-sensitive surfaces. To
4
select a function, simply press lightly on the rel-
evant field.
3
Touch display
You can see the current selection options in the
touch displays. To select a function, press dir-
ectly on the corresponding field. The text fields
change depending on the selection.
4
Touch fields
Touch fields are touch-sensitive surfaces. To
select a function, simply press lightly on the rel-
evant field.
Advertisement
Table of Contents
