Yale Unity Installation Manual

8
Unity Entrance Lock Installation Guide
TOOLS REQUIRED
Electric drill
r-l 025mm/1" Masking tape
� Spadebit
I
CI:
�
�
&
01 0mm/3/8" Chisel Pencil
012.5mm/ 1 /2" i
Drill bit
I I
0 5 4mm/ 2 1 /8" Phillips Head Ruler / Measuring tape
Hole saw screwdriver
+
C)
C)
0
C)
C)
Using the door template provided, mark out the required holes for
drilling including the latch and Door Position Sensor (DPS) hole.
ASSA ABLOY Australia Pty Ltd , 235 Huntingdale Rd, Oakleigh, VIC 3166 ABN 90 086 451 907 ©2020
Experience a safer and more open world
COMPONENTS
4 1 mm M5 mounting
26mm M5 mounting 31 mm M5 mounting
''"
screwsx4
screwsx4 screwsx4
( 51-60mm thick door)
( 3 5- 4 5mm thick door) ( 4 6-50mm thick door,
rrn
4 4mm spindle extension x 1
Spindle extension 34mm spindle extension x 1
( 50-60mm thick door)
shaflx 1 ( 4 5-50mm thick door,
Door Position Sensor
Striker plate x 1 Strikebo xxl
( D PS)x 1
00
External furniture x 1
Yale key tags x 2 Internal furniture x 1
DOOR OPENING INTERNAL & EXTERNAL
FURNITURE
LEFT HANDED RIGHT HANDED
fl
INTERNAL FURNITURE
DOORS DISPLAYED ARE VIEWED
FROM THE OUTSIDE.
EXTERNAL FURNITURE
To prepare the lock for install, you will need to establish whether
the door is right or left hand opening according to the image
above.
Once identified, you can now select the correct handing of the
lock to suit the door entry, right or left.
tim ber fixing Strike Bo x fixing screw x 1
screws x 4
i
60mm backset latch xl
Door Position Sensor
( D PS) magnet x 1
Cb
AA Alkaline
batteriesx 4
[ill
(
To hand the lock, on the inside of the handle, hold down on the
metal slide tab -G) located towards to bottom and rotate the
handle left or right depending on your selected handing -®.
Ensure you hold down the tab at all times during the
rotation. Rotation should be smooth, if you experience
firm resistance, release the handle and slide tab and
repeat handing process.
Ensure you complete this for both handles.
Battery cover
Screw
Interna l furniture late Ma net
0
Door
0
0
Insert the DPS through the 12.5mm hole on the dooredge.
Feed the cable first through the DPS hole.
External furniture l ate
ASSA.ABLOY