Buffalo TS6400DN0802 User Manual page 49

Chapter 4 Storage Management
When the confirmation screen is hidden, an undetected drive will automatically be dismounted from the TeraStation
and the TeraStation will be in degraded mode if a redundant RAID mode is configured. If RAID 0 is configured, the
RAID array will be corrupted so that data will be lost. It is recommended to proceed without changing settings that
make the confirmation screen appear.
Selecting the Action on the Confirmation Screen
When the confirmation screen is displayed, the following screen will appear after logging in to Settings if the drive
used for the RAID array could not be mounted. Select the action to run when the screen appears.
Conditions and Corrective Actions If Undetected Drives Aren't Displayed Properly
Even when you configure the NAS to show the confirmation screen if a drive being used for the RAID array cannot
be mounted, undetected drives will not be displayed under the following conditions. If you are using any of the
RAID array configurations below, follow the corrective action.
48