Table of Contents
Advertisement
Chapter 5 Backup
c. Click the settings icon (
d. Click Edit.
e. Select "Sync with UPS connected to this TeraStation" and reconfigure the desired UPS settings.
f. Click OK when completed.
2
Click Backup.
3
Click the settings icon (
4
Click Configure Failover.
5
Click Force Failover to Stop to cancel the failover settings.
6
Shut down this main TeraStation.
7
Turn the backup TeraStation on.
8
Log in to Settings for the backup TeraStation, then rename the TeraStation's hostname and configure the IP
address so that it has a new static IP address.
9
Power on the main TeraStation. To configure the UPS sync on the backup TeraStation, configure the settings
here. Otherwise, skip to the next step.
To synchronize with the UPS device connected to the main TeraStation, follow the procedure below on the
backup TeraStation.
a. Click Management.
b. Click the settings icon (
) to the right of "Power Management".
) to the right of "Failover".
) to the right of "Power Management".
120
Advertisement
Table of Contents
