Table of Contents
Advertisement
Chapter 7 Advanced Features
12
Click Add.
13
Choose the folder to restrict access to, and enter the clients that will have restricted access into the "Hosts"
field. Clients may be entered by hostname, IP address, or IP address range. Wildcards are supported. Separate
multiple entries with commas. You may assign read-only or read and write access to the listed clients. Rules
override any settings made from the Services tab.
14
Click OK.
Notes:
• To restrict NFS access to a specific network or client, navigate to File Sharing > NFS > Services and click Edit. Enter
the address of the network. For example, if your local network subnet has a router at 192.168.1.1 and clients
with IP addresses in the range from 192.168.1.2 through 192.168.1.48 with subnet mask 255.255.255.0, then the
"Public Network Address" would be 192.168.1.0 and the "Public Subnet Mask" would be 255.255.255.0. This would
183
Advertisement
Table of Contents
