Buffalo TS6400DN0802 User Manual page 103

Chapter 5 Backup
Snapshot and Overwrite Backups (Incremental and Differential)
Files and folders, including snapshots, have already been stored on the desired destination. You can access them by
switching the operation to the backup destination TeraStation. Alternatively, you can restore any files or folders by
creating a backup job and configuring the backup destination as a backup source and selecting the same backup
mode for the "Operation Mode" drop-down list. Please do not use the same folder as the backup destination to
restore backup data from multiple backup sources, as this may cause the restored data to get overwritten.
iSCSI Backups
The backup data can easily be restored by creating a new backup job. Follow the procedure below.
Make sure that there is an iSCSI file I/O volume on the TeraStation which you want to use for restoring the backup
data. If you do not have one already, refer to the
be aware that the existing iSCSI file I/O volume will be overwritten by the restored backup data.
1
From Settings, click Backup.
2
Click the settings icon (
3
If you had configured a backup device access key for the backup source folder on another Buffalo NAS device
or the backup destination folder, click Set. If you hadn't, skip to step 5.
"Creating an iSCSI Volume"
) to the right of "Backup".
102
section in chapter 4 to create one. Please